SHAFT 0544541 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
18 8M6802 SCREW-HEX SOCKET
ACTION REQUIRED
1. Verify that your machine does not have the hex-socket screw. If your machine has the hex-socket screws, no further action is necessary. If your machine has any type of screw other than the hex-socket screw, proceed to step 2. Please reference the image below for verification of screw type.
2. Remove one 4B-1283 Screw (torques head) and 8F-8052 Lock Washer from the door hinge and immediately replace with an 8M-6802 Screw (hex head). Do not use a washer with the new 8M-6802 Screw. The 8M-6802 Screw is to be tightened to a torque of 12 Nm +/- 3 Nm. Perform this process for all 18 screw locations. Reference the image below.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
4001-6000 hrs,
25-36 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 0.5-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.