SHAFT 0935705 - Caterpillar

Table 1
Required Parts
Qty Part Number Part Name
1 478-8975 Keypad Module Gp (Jog Dial)
Illustration 1 g06302811
478-8975 Keypad Module Gp (Jog Dial)
Illustration 2 g06272695
Location of part number change level
The improved keypad module group is identified by change level "06" or higher.Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 3 g06302303
(A) Screw
Remove the cup holder and loosen three screws (A).
Illustration 4 g06302307
(B) Cover
Illustration 5 g06302311
(C) Non marring tool
Lift the cover (B) from glass side front corner and work from the left to right.Note: Use a non marring tool (C) to help push out the tabs on the seat side.
Illustration 6 g06302326
(D) Screw
(E) Tie
Cut the zip tie (E) and remove four screws (D).
Reinstall the keypad module group with the four screws which were removed in Step 3.
Install the cover in keypad module group which was removed in Step 2.
Reinstall the screws which were removed in Step 1.