SHAFT 1029264 - Caterpillar

Illustration 1 g03269697
Typical example
(A) Chisel Tool
(B) Moil Point Tool
(C) Blunt Tool
Illustration 2 g03405630
(D) 179.45 1 mm (7.065 0.040 inch) diameter
(E) Area of tool inside the hammer
(F) 174.45 0.25 mm (6.868 0.010 inch) diameter
(G) 386 1 mm (15.197 0.040 inch)
Table 1
Tools for H180E S
Tool Part
Number Length
of Tool Working
Length Approximate Tool Weight
Chisel Tool (A) 374-3626 1500 mm (59.05 inch) 760.5 mm (29.94 inch) 266 kg (586 lb)
Moil Point Tool (B) 374-3627 1500 mm (59.05 inch) 760.5 mm (29.94 inch) 268 kg (590 lb)
Blunt Tool (C) 374-3629 1500 mm (59.05 inch) 760.5 mm (29.94 inch) 287 kg (633 lb) If diameter (D) of the tool inside hammer, area (E), is less than 177.5 mm (6.99 inch) or the tool is cracked, replace the tool.