SHAFT AS 1088853 - Caterpillar

Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Do not work on the engine and do not operate the engine unless the instructions and the warnings in the Operation and Maintenance Manual are understood. Proper care is your responsibility. Failure to follow the instructions or failure to heed the warnings could result in injury or in death.The following section illustrates and the following section describes the safety labels which may be found on the engine.
Illustration 1 g01037410
Hydraulic Electronic Unit Injectors (1)The warning label for the hydraulic electronic unit injector is located on the top of the valve cover.
g00907230
Explosion hazard, do not spray ether in the engine. Electrocution hazard. Hydraulic fluid under pressure. These hazards could cause personal injury or death. Read the Operation and Maintenance Manual before you service the engine.
The Electronic Control Module (ECM) sends a high voltage signal to the injector solenoid. To help prevent personal injury, disconnect the electronic unit injector enable circuit connector. Do not come in contact with the electronic unit injector terminals while the engine is running.Starting Aid (2)The safety sign for the starting aid is located on the hydraulic pump for the HEUI injectors.
g00283559
If equipped with an air inlet heater (AIH) for cold weather starting, do not use aerosal types of starting aids such as ether. Such use could result in an explosion and personal injury.