SHAFT 1118669 - Caterpillar

Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left. HOLD (5) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
Illustration 4 g00526411
Right hand joystick
Boom Lower (6) - Move the joystick to this position in order to lower the boom.
Bucket Dump (7) - Move the joystick to this position in order to dump the bucket or the work tool.
Boom Raise (8) - Move the joystick to this position in order to raise the boom.
Bucket Close (9) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Alternate Joystick Control Pattern
Illustration 5 g00526389
Left hand joystick
Boom Lower (1) - Move the joystick to this position in order to lower the boom.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Boom Raise (3) - Move the joystick to this position in order to raise the boom.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left. HOLD (5) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
Illustration 6 g00526411
Right hand joystick
Stick Out (6) - Move the joystick to this position in order to move the stick outward.
Bucket Dump (7) - Move the joystick to this position in order to dump the bucket or the work tool.
Stick In (8) - Move the joystick to this position in order to move the stick inward.
Bucket Close (9) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.