SHAFT 1121269 - Caterpillar

Illustration 10 g03378002Increase a number by pressing the "+" button on the right end of the incremental bar.Decrease a number by pressing the "-" button on the left end of the incremental bar.Incremental Bar with Value
Illustration 11 g03378008Increase a number by pressing the "+" button on the right end of the incremental bar.Decrease a number by pressing the "-" button on the left end of the incremental bar.When the desired number appears on the bar, press the "OK" button to highlight that number in yellow and set the number.The newly set number appears in white text.Incremental Bar with Range
Illustration 12 g03378010Increase a number by pressing the "+" button on the right end of the incremental bar.Decrease a number by pressing the "-" button on the left end of the incremental bar.When the desired number appears on the bar, press the "OK" button to highlight that number in yellow and set the number.When the number is set, a green status bar appears with the new number in white.Navigation Path
Illustration 13 g03657336The navigation path that has been followed is shown in the top portion of the screen.These icons show the pages that have been visited, or the path taken, to arrive at the current page.Lower Information Banner
Illustration 14 g03657337The lower information banner will display fault information and information pop ups.Tire Pressure Monitoring System (TPMS) (If Equipped)
Illustration 15 g06295120
Tire Monitor Page
Illustration 16 g06295153
Tire Pressure Monitoring System (TPMS) Sensor
The Tire Pressure Monitoring System (TPMS) allows you to see the current pressure for each tire. The tire pressure is measured by sensors installed and on the valve stem of each tire. The system may be configured by your Cat dealer in Electronic Technician (ET). To access the tire monitor page, press the machine button, then press the parameters button.Additional Information
Reference: More detailed information about the use of Information Display and the Tire Monitor System is available in a separate publication. Refer to Systems Operation, KENR6489, "Wheel Dozer, Soil Compactor, Landfill Compactor, and Large Wheel Loader Information Display (touchscreen)".Warning Categories
The Cat Monitoring System notifies the operator of an immediate problem with a machine system or an impending problem with a machine system. The Cat Monitoring System provides four warning categories. The categories are based on the severity of the problem. The categories dictate the required response of the operator.
Table 2
OPERATION
Warning Category Warning Indications (1) Required Action Possible Result (2)
Flashing Indicator Flashing Action Lamp Sounding of the Action Alarm
1 X No immediate action is required. The system needs attention soon. No harm or damage
2 X X Change machine operation or perform maintenance to the system. Severe damage to components
2-S X X X (3) Immediately change the machine operation. Severe damage to components
3 X X X (4) Immediately perform a safe engine shutdown. Injury to the operator or severe damage to components
(1) The warning indicators that are active are marked with an "X".
(2) These are possible results if no action is taken.
(3) The alarm is on continuously.
(4) The alarm is on intermittently.