1141325 SHAFT-PINION Caterpillar parts
315, 315B, 315B L, 317, 317B LN
Rating:
Alternative (cross code) number:
CA1141325
114-1325
1141325
CA1141325
114-1325
1141325
Weight: 34 pounds 15 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Genuine OEM Transfer Case Input Shaft Seal for Mercedes 0149971346
Newparts
Newparts
$372.90
17 Aug 2023
0.01[0.00] Pounds
US: DataAlchemy
W.E. Anderson PC Sight Flow Indicator w/A-711, SFI-801-3/4-A711, 3-35 GPM (11.4-132.5 LPM)
W.E. Anderson® MANUFACTURER DIRECT || Wetted Materials: Body: UV Stabilized Polycarbonate; Window: UV Stabilized Polycarbonate; Rotor: Red UV Stabilized PBT; Rotor Pin: 316 SS; Thrust Washers: 300 Series SS; O-Ring: Buna-N || Temperature Limits: -20 to 130°F (-29 to 55°C) || Pressure Limits: 125 psi (8.62 bar) || Viscosity Maximum: 200 SSU
W.E. Anderson® MANUFACTURER DIRECT || Wetted Materials: Body: UV Stabilized Polycarbonate; Window: UV Stabilized Polycarbonate; Rotor: Red UV Stabilized PBT; Rotor Pin: 316 SS; Thrust Washers: 300 Series SS; O-Ring: Buna-N || Temperature Limits: -20 to 130°F (-29 to 55°C) || Pressure Limits: 125 psi (8.62 bar) || Viscosity Maximum: 200 SSU
$167.05
17 Aug 2023
0.2[0.09] Pounds
US: DataAlchemy
W.E. Anderson PC Sight Flow Indicator, SFI-801-3/4, 3-35 GPM (11.4-132.5 LPM), 3/4" FNPT
W.E. Anderson® MANUFACTURER DIRECT || Wetted Materials: Body: UV Stabilized Polycarbonate; Window: UV Stabilized Polycarbonate; Rotor: Red UV Stabilized PBT; Rotor Pin: 316 SS; Thrust Washers: 300 Series SS; O-Ring: Buna-N || Temperature Limits: -20 to 130°F (-29 to 55°C) || Pressure Limits: 125 psi (8.62 bar) || Viscosity Maximum: 200 SSU
W.E. Anderson® MANUFACTURER DIRECT || Wetted Materials: Body: UV Stabilized Polycarbonate; Window: UV Stabilized Polycarbonate; Rotor: Red UV Stabilized PBT; Rotor Pin: 316 SS; Thrust Washers: 300 Series SS; O-Ring: Buna-N || Temperature Limits: -20 to 130°F (-29 to 55°C) || Pressure Limits: 125 psi (8.62 bar) || Viscosity Maximum: 200 SSU
This part in 2 request:
Show.
This information for suppliers only!
2023-02-08
2023-01-13
Number on catalog scheme:
13
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the hydraulic oil tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g01350368
Disconnect hose assemblies (2) and (4) from gear pump (3) .
Remove bolts (1) and gear pump (3) .
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the hydraulic oil tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g01350368
Disconnect hose assemblies (2) and (4) from gear pump (3) .
Remove bolts (1) and gear pump (3) .
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
206, 212, 3054, 307, 312, 315, 317, 416B, 416C, 426B, 426C, 428, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433B, CP-433C, CS-323C,...
3054, 3054B, 3056, 3056E, 307, 312B L, 312C, 315B L, 416B, 416C, 416D, 420D, 424D, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 914G, 924G, 924GZ, AP-80...
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 315, 315B, 315C, 317B LN, 318B, 906, 90...
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 321C, 325D, 329D L, 345C L, OEMS
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
315, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D L, 320D2, 322B LN, 322C, 323D L, 323D LN, 323D2 L, 324D, 324D L, 324D LN, 325D, 329D L,...
1076559
SHAFT
311, 311B, 315
311, 311B, 315
315, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D L, 320D2, 322B LN, 322C, 323D L, 323D LN, 323D2 L, 324D, 324D L, 324D LN, 325D, 329D L,...
6I5364
SHAFT
312, 315, 317, 325 L, 330 L, 350, 375, 375 L, 5130, 5230
312, 315, 317, 325 L, 330 L, 350, 375, 375 L, 5130, 5230
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
1532686
SHAFT
312, 312B L, 312C
312, 312B L, 312C
1469661
SHAFT
312, 312B L
312, 312B L
5W0116
SHAFT
206, 212, 214B, 224B, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
206, 212, 214B, 224B, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
1292703
SHAFT
M312, M313C, M315, M315C, M316C, M318
M312, M313C, M315, M315C, M316C, M318
1293458
SHAFT
M315, M315C, M316C, M318
M315, M315C, M316C, M318
5W7381
SHAFT-SEAL
206B, 212, 212B, M312, M313C, M315, M315C, M316C, M318
206B, 212, 212B, M312, M313C, M315, M315C, M316C, M318
2047842
SHAFT-AXLE
M315, M315C, M316C, M318, M318C
M315, M315C, M316C, M318, M318C
M312, M313C, M315, M315C, M316C, M318, M318C