1145797 SHAFT-DRIVE Caterpillar parts
35, 45, 55
Rating:
Alternative (cross code) number:
CA1145797
114-5797
1145797
CA1145797
114-5797
1145797
Weight: 16 pounds 7 kg.
CHALLENGER,
Information:
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01239032
Remove bolts (1) and the washers. Remove cover (2) and the O-ring seal from final drive (3).
Illustration 2 g01239043
Remove retainer (4) from final drive (3).
Illustration 3 g01239044
Use Tooling (A) to remove outer axle (5) (not shown) from final drive (3).
Illustration 4 g01239045
Use Tooling (A) to remove inner axle (6) (not shown) from final drive (3).
Repeat Steps 1 through 3 for the final drive on the opposite side of the machine.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A FT1952 Axle Removal Tool 1
B 369–9451 Petro Gel Amber Grease 1
Start the engine and release the parking brake.
Illustration 5 g06120222
Illustration 6 g06120218
Illustration 7 g06120210
Apply Tooling (B) to the axles at locations (X).Note: Remove all burrs from the axles before applying Tooling (B).
Illustration 8 g01239045
Use Tooling (A) to install inner axle (6) (not shown) to final drive (3).Note: If the carrier is disengaged from the bevel gear shaft, slide the carrier on the bevel gear shaft as the inner axle is installed.
Illustration 9 g01239044
Use Tooling (A) to install outer axle (5) (not shown) to final drive (3).
Illustration 10 g01239043
Install retainer (4) to final drive (3).
Repeat Steps 1 through 4 for the other side of the machine.
Illustration 11 g01239032
Position cover (2) and the O-ring seal to final drive (3). Install bolts (1) and the washers.
Repeat Steps 4 through 7 for the final drive on the opposite side of the machine.
Stop the engine.
Check the oil levels. Refer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for the correct procedure.
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
7W9737
SHAFT-OIL PUMP
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, ...
2W7565
SHAFT-IDLER
214B, 3114, 3116, 3126, 320 L, 325, 35, 446B, 446D, 45, 55, 613C II, 918F, 924F, 950F, 950F II, 960F, 963B, AP-1000, AP-1050, BG-2455C, BG-245C, CB-634C, CP-563, CS-533C, CS-563C, CS-583C, IT12B, IT24...
214B, 3114, 3116, 3126, 320 L, 325, 35, 446B, 446D, 45, 55, 613C II, 918F, 924F, 950F, 950F II, 960F, 963B, AP-1000, AP-1050, BG-2455C, BG-245C, CB-634C, CP-563, CS-533C, CS-563C, CS-583C, IT12B, IT24...
4P7790
SHAFT AS-ARM
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 224B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 58...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 224B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 58...
7W4137
SHAFT AS
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 224B, 30/30, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, ...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 224B, 30/30, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, ...
2W8087
SHAFT AS
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 446B, 446D, 45, 55, 561M, 613C II, 918F, 924F, 928G, 938F, 938G, 950F, 950F...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 446B, 446D, 45, 55, 561M, 613C II, 918F, 924F, 928G, 938F, 938G, 950F, 950F...
2W8090
SHAFT AS-IDLER
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 446B, 446D, 45, 55, 561M, 613C II, 918F, 924F, 928G, 938F, 938G, 950F, 950F...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 446B, 446D, 45, 55, 561M, 613C II, 918F, 924F, 928G, 938F, 938G, 950F, 950F...
4P3538
SHAFT-THROTTLE
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 211B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, ...
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 211B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, ...
2777089
SHAFT AS
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 561M, 574, 613C II, 924F,...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 561M, 574, 613C II, 924F,...
7T8136
SHAFT-PLANETARY
30/30, 35, 45, 55, 583T, D5R LGP, D6H, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, D9R, D9T...
30/30, 35, 45, 55, 583T, D5R LGP, D6H, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, D9R, D9T...
3T4568
SHAFT-PLANETARY
30/30, 35, 45, 55, 583T, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, ...
30/30, 35, 45, 55, 583T, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, ...
1154074
SHAFT AS
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
1154116
SHAFT AS
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
1081891
SHAFT
35, 45, 55
35, 45, 55
1145828
SHAFT AS
35, 45, 55
35, 45, 55
1145826
SHAFT AS
35, 45, 55
35, 45, 55
1145759
SHAFT AS
35, 45, 55
35, 45, 55
1135565
SHAFT-IDLER
35, 45, 55
35, 45, 55
1630433
SHAFT AS
35, 45, 55
35, 45, 55
1204862
SHAFT AS
45, 55
45, 55
1128840
SHAFT AS
35, 45, 55
35, 45, 55
1082777
SHAFT AS
45, 55, AP-1055B, BG-2455C
45, 55, AP-1055B, BG-2455C
1193901
SHAFT-PLANETARY
35, 45, 55
35, 45, 55
1193896
SHAFT-PLANETARY
35, 45, 55
35, 45, 55