1236666 SHAFT-WATER PUMP Caterpillar parts
16G, 16H NA, 24H, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 375, 375 L, 5080, 578, 589, 621E, 621F, 623E, 627E, 627F, 631E, 633E II, 637E, 651E, 657E, 768C, 769C, 769D,...
Rating:
Alternative (cross code) number:
CA1236666
123-6666
1236666
CA1236666
123-6666
1236666
Weight: 0.95 pounds 0 kg.
ARTICULATED TRUCK, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DMKD IBC Tote Cover for 275 Gallon (1000L),，Outdoor Rain Barrel Water Tank Protective Cover, Patio Furniture Covers，with Zipper, Waterproof,210D Oxford Cloth Cov(Size:47.24x39.37x45.67in,Color:Green)
DMKD 【Material】The IBC Tote Cover is made of 210D silver-plated Oxford cloth, which prevents sunlight from directly penetrating the cloth into the bucket. || 【Standard size】The IBC tote cover is120x100x116cm/ 47.2 x 39.4 x 45.7 in.Fitting 275 Gallon IBC Tote 1000L Water Tank. It protects the tank from direct sunlight, prolonging its service life and sanitation. || 【Design】 There is a zipper on one side, more easily check water level in the tank. || 【Reusable】With the help of the notch, the so-called lid flap, even the covered IBC water container can be used completely without removing the film. || 【Universality 】This storage tank cover is universally suitable for IBC barrel, water tank, container barrel.Please check the size beore your order.
DMKD 【Material】The IBC Tote Cover is made of 210D silver-plated Oxford cloth, which prevents sunlight from directly penetrating the cloth into the bucket. || 【Standard size】The IBC tote cover is120x100x116cm/ 47.2 x 39.4 x 45.7 in.Fitting 275 Gallon IBC Tote 1000L Water Tank. It protects the tank from direct sunlight, prolonging its service life and sanitation. || 【Design】 There is a zipper on one side, more easily check water level in the tank. || 【Reusable】With the help of the notch, the so-called lid flap, even the covered IBC water container can be used completely without removing the film. || 【Universality 】This storage tank cover is universally suitable for IBC barrel, water tank, container barrel.Please check the size beore your order.
DMKD IBC Tote Cover for 275 Gallon (1000L),，Outdoor Rain Barrel Water Tank Protective Cover, Patio Furniture Covers，with Zipper, Waterproof,210D Oxford Cloth Cov(Size:47.24x39.37x45.67in,Color:Black)
DMKD 【Material】The IBC Tote Cover is made of 210D silver-plated Oxford cloth, which prevents sunlight from directly penetrating the cloth into the bucket. || 【Standard size】The IBC tote cover is120x100x116cm/ 47.2 x 39.4 x 45.7 in.Fitting 275 Gallon IBC Tote 1000L Water Tank. It protects the tank from direct sunlight, prolonging its service life and sanitation. || 【Design】 There is a zipper on one side, more easily check water level in the tank. || 【Reusable】With the help of the notch, the so-called lid flap, even the covered IBC water container can be used completely without removing the film. || 【Universality 】This storage tank cover is universally suitable for IBC barrel, water tank, container barrel.Please check the size beore your order.
DMKD 【Material】The IBC Tote Cover is made of 210D silver-plated Oxford cloth, which prevents sunlight from directly penetrating the cloth into the bucket. || 【Standard size】The IBC tote cover is120x100x116cm/ 47.2 x 39.4 x 45.7 in.Fitting 275 Gallon IBC Tote 1000L Water Tank. It protects the tank from direct sunlight, prolonging its service life and sanitation. || 【Design】 There is a zipper on one side, more easily check water level in the tank. || 【Reusable】With the help of the notch, the so-called lid flap, even the covered IBC water container can be used completely without removing the film. || 【Universality 】This storage tank cover is universally suitable for IBC barrel, water tank, container barrel.Please check the size beore your order.
Number on catalog scheme:
11
For full view, you need register
Compatible equipment models: 1236666:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 241-0124 Valve Spring Compressor 1
B 4C-9496 Spring Tester 1 Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Place the piston at the top of the compression stroke (TC). Remove the valve springs for that cylinder. If the valves fall into the cylinder liner, then the cylinder head must be removed.
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01133502
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) on valve mechanism cover base (6).
Use Tooling (A) to compress inner valve spring (3) and outer valve spring (4). Remove valve spring keepers (1) from the valve.
Carefully remove Tooling (A).
Remove valve rotator (2), inner valve spring (3), and outer valve spring (4).
Remove washer (5) from the exhaust valve guide. Note: Washers are not installed on the inlet valve guide.
Use Tooling (B) to check the valve springs (spring force). Refer to Specifications, "Cylinder Head Valves" for additional information on the valve springs. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 241-0124 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lubricate the valve stems with clean engine oil.
Illustration 2 g01133502
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Position washer (5), inner valve spring (3), and outer valve spring (4) on the exhaust valve guide.
Position inner valve spring (3) and outer valve spring (4) on the inlet valve guide. Note: Washer (5) is not installed on the inlet valve guides.
Position valve rotator (2) on the valve stem.
Install Tooling (A) on valve mechanism cover base (6).
Use Tooling (A) to compress inner valve spring (3) and outer valve spring (4). Install valve spring keepers (1) on the valve. Ensure that the valve spring keepers are properly installed.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Carefully remove Tooling (A). End By:
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 241-0124 Valve Spring Compressor 1
B 4C-9496 Spring Tester 1 Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Place the piston at the top of the compression stroke (TC). Remove the valve springs for that cylinder. If the valves fall into the cylinder liner, then the cylinder head must be removed.
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01133502
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) on valve mechanism cover base (6).
Use Tooling (A) to compress inner valve spring (3) and outer valve spring (4). Remove valve spring keepers (1) from the valve.
Carefully remove Tooling (A).
Remove valve rotator (2), inner valve spring (3), and outer valve spring (4).
Remove washer (5) from the exhaust valve guide. Note: Washers are not installed on the inlet valve guide.
Use Tooling (B) to check the valve springs (spring force). Refer to Specifications, "Cylinder Head Valves" for additional information on the valve springs. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 241-0124 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lubricate the valve stems with clean engine oil.
Illustration 2 g01133502
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Position washer (5), inner valve spring (3), and outer valve spring (4) on the exhaust valve guide.
Position inner valve spring (3) and outer valve spring (4) on the inlet valve guide. Note: Washer (5) is not installed on the inlet valve guides.
Position valve rotator (2) on the valve stem.
Install Tooling (A) on valve mechanism cover base (6).
Use Tooling (A) to compress inner valve spring (3) and outer valve spring (4). Install valve spring keepers (1) on the valve. Ensure that the valve spring keepers are properly installed.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Carefully remove Tooling (A). End By:
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Cat SIS web machinery list:
Parts shaft Caterpillar catalog:
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 16G
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 16G
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M
14G, 14H, 14H NA, 16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA, 24M
16M, 24H, 24M
3406, 3406B, 3406C, 3408B, 3412, G3406
1333572
SHAFT-WATER PUMP
245D, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 589, 631E, 633E II, 637E, 657E, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D9R, G3408, G3408B, G3412, PM-565, PM-565B, P...
245D, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 589, 631E, 633E II, 637E, 657E, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D9R, G3408, G3408B, G3412, PM-565, PM-565B, P...
1223214
SHAFT
3508B, 3512, 3512B, 3516, 3516B, 3516C
3508B, 3512, 3512B, 3516, 3516B, 3516C
1012982
SHAFT-IDLER
3516
3516
6I1193
SHAFT AS-TURBINE
3406B, 3406C, 3408C, 3412, 589, 657E, 834B, 836, 988F II
3406B, 3406C, 3408C, 3412, 589, 657E, 834B, 836, 988F II
3408B, 3408C, 3412, 3412C, PM3412, SCT673, SPS342, SPT342
1964791
SHAFT AS
3508B, 3512, 3512B, 3516B, 5130B, 5230B, 776D, 777D, 784C, 785C, 789C, 793C, 797, 797B, 854G, 992G, 994D, D11N, D11R, PM3508, PM3516, PP3516, SPF343
3508B, 3512, 3512B, 3516B, 5130B, 5230B, 776D, 777D, 784C, 785C, 789C, 793C, 797, 797B, 854G, 992G, 994D, D11N, D11R, PM3508, PM3516, PP3516, SPF343
3508B, 3512B, 3516B, 5130B, 776D, 777D, 785C, 789C, 793C, 797, 854G, 992G, 994D, D11R
30/30, 3116, 3126, DEUCE
1095332
SHAFT
3176B
3176B
1187572
SHAFT-STUB
3176B, 3176C, 3196, C-10, C-12, C11, C12, C13, CX31-C13I, TH35-C11I, TH35-C13I
3176B, 3176C, 3196, C-10, C-12, C11, C12, C13, CX31-C13I, TH35-C11I, TH35-C13I
1055135
SHAFT-SHUTOFF
3408B, 3412, 3412E
3408B, 3412, 3412E