1247276 SHAFT AS-ROLLER Caterpillar parts
330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 365C L, OEMS
Rating:
Alternative (cross code) number:
CA1247276
124-7276
1247276
CA1247276
124-7276
1247276
Weight: 27 pounds 12 kg.
EXCAVATOR, UNDERCARRIAGE,
Compatible equipment models: 1247276:
Number on catalog scheme:
1
For full view, you need register
Information:
Test For An Open Circuit
Table 1
Troubleshooting Test Steps Values Results
1. Identify Open Circuit
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At one of the disconnected harness connections, place a jumper wire from the contact of the suspect wire to frame ground.
E. At the other connector of the machine harness, use the multimeter probes to measure the resistance. Measure the resistance from the contact of the suspect wire to frame ground.
The resistance is less than 5 Ω. OK - The harness circuit is correct.
STOP
NOT OK - The resistance is greater than 5K Ω. There is an open in the machine harness.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
STOP
Table 1
Troubleshooting Test Steps Values Results
1. Identify Open Circuit
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At one of the disconnected harness connections, place a jumper wire from the contact of the suspect wire to frame ground.
E. At the other connector of the machine harness, use the multimeter probes to measure the resistance. Measure the resistance from the contact of the suspect wire to frame ground.
The resistance is less than 5 Ω. OK - The harness circuit is correct.
STOP
NOT OK - The resistance is greater than 5K Ω. There is an open in the machine harness.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
STOP
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
1090, 1140, 1150, 1160, 1190, 1190T, 120M, 120M 2, 1290T, 12E, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1673, 1673B,...
140H, 143H, 14H, 160H, 163H, 16H, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75E, 814F, 815F, 816F, 85E, 95E, 966G II, 972G II, C-10, C-12, C12...
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 321C, 325D, 329D L, 345C L, OEMS
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345D, 345D L, 345D L VG, 349D, 349D L, 525D, 535D, 5...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
320 L, 325, 325 L, 325 LN, E240C, OEMS
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
365B, 365B II, 365B L, 365C, 365C L, 365C L MH
330, 330B, 330B L, 345B L
6Y2790
SHAFT-TRACK ROLLER
330, 330 FM L, 330 L, 330B L, OEMS
330, 330 FM L, 330 L, 330B L, OEMS
325C, 328D LCR, 330, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L,...
12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H, 163H NA
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 24H
120G, 12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
2095914
SHAFT
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
6I6994
SHAFT
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
1588090
SHAFT-TRACK ROLLER
330B L, OEMS
330B L, OEMS