SHAFT AS-STEERING 1275671 - Caterpillar

Illustration 25 g00875537
Remove swashplate assembly (38).
Illustration 26 g00875538
Remove slide (39), two rods (40), and two bearings (41).
Illustration 27 g00875539
Remove bearings (42).
Illustration 28 g00875564
Remove plug assembly (44) and joint pin (43).
Repeat Step 31 for the opposite side.
Illustration 29 g00875567
Remove four bolts (45) and servo valve (46).
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 30 g00875568
Use Tooling (A) and a suitable press in order to remove retaining ring (47).
Illustration 31 g00875569
Use Tooling (C) and a suitable press in order to remove ring assembly (48).
Illustration 32 g00875570
Remove spring retainer (49). Remove springs (50), (51), and (52). Remove spring retainer (53).
Illustration 33 g00875571Note: Measure nut (54) for installation.
Remove nut (54) and cover (55).
Illustration 34 g00875573
Remove O-ring seal (56) from cover (55).
Illustration 35 g00875599
Use Tooling (A) and a suitable press in order to remove retaining ring (57).
Illustration 36 g00875601
Remove O-ring seal (58) and ring assembly (59). Remove spring retainer (60). Remove springs (61), (62), and (64). Remove spring retainer (63) and rod (65).
Illustration 37 g00875602
Remove four bolts (66) and cover (67).
Illustration 38 g00875604
Remove O-ring seal (68) from cover (67).
Illustration 39 g00877519
Remove guide ring (69) and ring (70).