SHAFT AS 1325551 - Caterpillar

Removal Procedure
Start By:
Release the pressure in the hydraulic system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g00857306
Disconnect hose assemblies (2) and (3) from manual ball valve (4).
Disconnect hose assemblies (5) and (6) from manual ball valve (4).
Remove bolts (1) and remove bracket (7) from manual ball valve (4). Remove manual ball valve (4) from the machine. Installation Procedure
Install manual ball valve (4) in the reverse order of removal.