1501306 SHAFT AS Caterpillar parts
D11N, D11R
Rating:
Alternative (cross code) number:
CA1501306
150-1306
1501306
CA1501306
150-1306
1501306
Weight: 85 pounds 38 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$492.06
08 May 2024
Amazon.com
Aries 1501306 Fits Jeep Wrangler
ARIES DEPENDABLE LIGHT. This LED light bar for Jeep Wrangler or Jeep Gladiator provides bright, clear, consistent light on your custom Jeep build, featuring grade-A LED chips. The 50-inch double-row LED light bar offers 24,000 lumens with a combo beam || WEATHER-RESISTANT. This Jeep LED light easily withstands the rigors of the offroad trail, featuring a waterproof aluminum housing and IP68-standard breather. The light is also fitted with a waterproof wiring harness for reliable power || LONG-LASTING. This Jeep Wrangler / Jeep Gladiator light bar is thoroughly tested for UV, extreme temperatures, vibration, dust and salt exposure. It also passes CE and RoHS testing. The light features a 50,000+ hour average lifespan || NO-DRILL INSTALL. The Jeep LED light brackets install onto your Jeep Wrangler JL or Jeep Gladiator with a custom fit and no drilling required. They use factory hardware on the Jeep Wrangler JL or Jeep Gladiator to quickly and securely bolt into place || DURABLE. For reliable strength and reduced light vibration, these Jeep light brackets are constructed from solid steel, and they are finished in a durable black powder coat to easily withstand the outdoor elements
ARIES DEPENDABLE LIGHT. This LED light bar for Jeep Wrangler or Jeep Gladiator provides bright, clear, consistent light on your custom Jeep build, featuring grade-A LED chips. The 50-inch double-row LED light bar offers 24,000 lumens with a combo beam || WEATHER-RESISTANT. This Jeep LED light easily withstands the rigors of the offroad trail, featuring a waterproof aluminum housing and IP68-standard breather. The light is also fitted with a waterproof wiring harness for reliable power || LONG-LASTING. This Jeep Wrangler / Jeep Gladiator light bar is thoroughly tested for UV, extreme temperatures, vibration, dust and salt exposure. It also passes CE and RoHS testing. The light features a 50,000+ hour average lifespan || NO-DRILL INSTALL. The Jeep LED light brackets install onto your Jeep Wrangler JL or Jeep Gladiator with a custom fit and no drilling required. They use factory hardware on the Jeep Wrangler JL or Jeep Gladiator to quickly and securely bolt into place || DURABLE. For reliable strength and reduced light vibration, these Jeep light brackets are constructed from solid steel, and they are finished in a durable black powder coat to easily withstand the outdoor elements
$492.06
23 Sep 2022
Amazon.com
ARIES 1501306 50-Inch LED Light Bar for Jeep Wrangler JL, Gladiator, Windshield Brackets, 24,000-Lumen Combo Beam
ARIES DEPENDABLE LIGHT. This LED light bar for Jeep Wrangler or Jeep Gladiator provides bright, clear, consistent light on your custom Jeep build, featuring grade-A LED chips. The 50-inch double-row LED light bar offers 24,000 lumens with a combo beam || WEATHER-RESISTANT. This Jeep LED light easily withstands the rigors of the offroad trail, featuring a waterproof aluminum housing and IP68-standard breather. The light is also fitted with a waterproof wiring harness for reliable power || LONG-LASTING. This Jeep Wrangler / Jeep Gladiator light bar is thoroughly tested for UV, extreme temperatures, vibration, dust and salt exposure. It also passes CE and RoHS testing. The light features a 50,000+ hour average lifespan || NO-DRILL INSTALL. The Jeep LED light brackets install onto your Jeep Wrangler JL or Jeep Gladiator with a custom fit and no drilling required. They use factory hardware on the Jeep Wrangler JL or Jeep Gladiator to quickly and securely bolt into place || DURABLE. For reliable strength and reduced light vibration, these Jeep light brackets are constructed from solid steel, and they are finished in a durable black powder coat to easily withstand the outdoor elements
ARIES DEPENDABLE LIGHT. This LED light bar for Jeep Wrangler or Jeep Gladiator provides bright, clear, consistent light on your custom Jeep build, featuring grade-A LED chips. The 50-inch double-row LED light bar offers 24,000 lumens with a combo beam || WEATHER-RESISTANT. This Jeep LED light easily withstands the rigors of the offroad trail, featuring a waterproof aluminum housing and IP68-standard breather. The light is also fitted with a waterproof wiring harness for reliable power || LONG-LASTING. This Jeep Wrangler / Jeep Gladiator light bar is thoroughly tested for UV, extreme temperatures, vibration, dust and salt exposure. It also passes CE and RoHS testing. The light features a 50,000+ hour average lifespan || NO-DRILL INSTALL. The Jeep LED light brackets install onto your Jeep Wrangler JL or Jeep Gladiator with a custom fit and no drilling required. They use factory hardware on the Jeep Wrangler JL or Jeep Gladiator to quickly and securely bolt into place || DURABLE. For reliable strength and reduced light vibration, these Jeep light brackets are constructed from solid steel, and they are finished in a durable black powder coat to easily withstand the outdoor elements
$378.00
17 Apr 2022
US: HAMILTONBOBS
Hamiltonbobs Premium Quality Hydraulic Lift Head Cover Made for Massey Ferguson MF.
HamiltonBobs
HamiltonBobs
Number on catalog scheme:
1
For full view, you need register
Information:
Probable Causes
Note: An engine with a Diesel Particulate Filter (DPF) that has been removed will emit black smoke.
Failed Diesel Particulate Filter (DPF)Recommended Actions
Illustration 1 g01451187
Obvious failure of a DPF
Table 1
Troubleshooting Test Steps Values Results
1. Failed DPF
The outlet side of the DPF is the only side that can be used to determine a failure.
A. Remove the DPF and check for signs of a failure. Refer to Illustration 1 for an example of an obvious failure. Most failures are not obvious.
Refer to Special Instruction, SEBF9223, "Diesel Particulate Filter Reuse Guidelines" for additional information.
DPF
Result: There are no signs of failure.
Repair: Reinstall the DPF.
Return the unit to service.
Result: There are signs of failure.
Repair: Reinstall the failed DPF and Proceed to Test Step 2.
2. Diagnostic Codes
A. Check for any logged or active codes associated with high soot loading.
Codes
Result: There are no codes present.
Proceed to Test Step 3.
Result: There are codes present.
Repair: Troubleshoot the codes before continuing with this procedure.
3. Perform the Automatic Cylinder Cutout Test using Cat ET.
A. Perform the Automatic Cylinder Cutout Test.
Cylinder Cutout Test
Result: The test was successful.
Proceed to Test Step 4.
Result The test was not successful.
Repair: Make the necessary repairs, Proceed to Test Step 6.
4. Check for Boost Pressure Leaks
A. Check for boost pressure leaks.
Leaks
Result There are leaks found.
Repair: Repair the boost pressure leaks. Proceed to Test Step 6.
Result There are no leaks found.
Proceed to Test Step 5.
5. Inspect the Turbocharger
A. Check for boost pressure leaks.
Refer to Testing and Adjusting, "Turbocharger - Inspect" for additional information.
Turbocharger
Result The turbocharger is OK.
Proceed to Test Step 6.
Result The turbocharger is not OK.
Repair: Replace the turbocharger and Proceed to Test Step 6.
6. Perform the ARD Ignition Test
A. Perform an ARD ignition test using Cat ET to verify the correct operation of the Clean Emissions Module (CEM).
The ASH model must be reset if a new DPF is installed.
B. If the DPF has failed, replace the DPF. Reset the ASH model in Cat ET. Refer to Troubleshooting, "Electronic Technician Service Features, DPF ASH Service" for additional information.
ARD Ignition Test
Result The test was successful.
Return the unit to service.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Note: An engine with a Diesel Particulate Filter (DPF) that has been removed will emit black smoke.
Failed Diesel Particulate Filter (DPF)Recommended Actions
Illustration 1 g01451187
Obvious failure of a DPF
Table 1
Troubleshooting Test Steps Values Results
1. Failed DPF
The outlet side of the DPF is the only side that can be used to determine a failure.
A. Remove the DPF and check for signs of a failure. Refer to Illustration 1 for an example of an obvious failure. Most failures are not obvious.
Refer to Special Instruction, SEBF9223, "Diesel Particulate Filter Reuse Guidelines" for additional information.
DPF
Result: There are no signs of failure.
Repair: Reinstall the DPF.
Return the unit to service.
Result: There are signs of failure.
Repair: Reinstall the failed DPF and Proceed to Test Step 2.
2. Diagnostic Codes
A. Check for any logged or active codes associated with high soot loading.
Codes
Result: There are no codes present.
Proceed to Test Step 3.
Result: There are codes present.
Repair: Troubleshoot the codes before continuing with this procedure.
3. Perform the Automatic Cylinder Cutout Test using Cat ET.
A. Perform the Automatic Cylinder Cutout Test.
Cylinder Cutout Test
Result: The test was successful.
Proceed to Test Step 4.
Result The test was not successful.
Repair: Make the necessary repairs, Proceed to Test Step 6.
4. Check for Boost Pressure Leaks
A. Check for boost pressure leaks.
Leaks
Result There are leaks found.
Repair: Repair the boost pressure leaks. Proceed to Test Step 6.
Result There are no leaks found.
Proceed to Test Step 5.
5. Inspect the Turbocharger
A. Check for boost pressure leaks.
Refer to Testing and Adjusting, "Turbocharger - Inspect" for additional information.
Turbocharger
Result The turbocharger is OK.
Proceed to Test Step 6.
Result The turbocharger is not OK.
Repair: Replace the turbocharger and Proceed to Test Step 6.
6. Perform the ARD Ignition Test
A. Perform an ARD ignition test using Cat ET to verify the correct operation of the Clean Emissions Module (CEM).
The ASH model must be reset if a new DPF is installed.
B. If the DPF has failed, replace the DPF. Reset the ASH model in Cat ET. Refer to Troubleshooting, "Electronic Technician Service Features, DPF ASH Service" for additional information.
ARD Ignition Test
Result The test was successful.
Return the unit to service.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
1090, 1140, 1150, 1160, 1190, 1190T, 120M, 120M 2, 1290T, 12E, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1673, 1673B,...
416B, 426B, 428B, D11R
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
3508, 3508B, 3508C, 3512, 3516, 3516B, 5130, 5230, 776C, 784B, 785, 785B, 789B, 793B, 994, D11N, D11R, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, PM3512, PM3516, PMG3516
3508, 3508B, 3508C, 3512, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, G3508, G3508B, G3512, PM3508
3508, 3508B, 3508C, 3512, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, G3508, G3508B, G3512, PM3508
3406B, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 79...
3508, 3508B, 3508C, 3512, 3512B, 3516, 3516B, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793, 793B, 793C, 854G, 992G, 994, 994D, D11N, D11R, G3508, G3512...
AD40, AD45, AE40, D10, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, R2900G, R3000H
D11R, D11T
854G, 854K, D11N, D11R, D11T
D11R, D11T
6I8361
SHAFT
D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R
D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R
8N8041
SHAFT AS
D11N, D11R
D11N, D11R
8E3429
SHAFT
527, D5HTSK II
527, D5HTSK II
6Y7496
SHAFT AS
D5HTSK II
D5HTSK II
8E4017
SHAFT-TRACK IDLER
517, D5HTSK II, OEMS
517, D5HTSK II, OEMS
8E0179
SHAFT-GOVERNOR CONTROL
517, 527, D4HTSK II, D4HTSK III, D5HTSK II
517, 527, D4HTSK II, D4HTSK III, D5HTSK II
6P8286
SHAFT-OUTPUT
D10, D11N
D10, D11N
8P7250
SHAFT AS-INPUT
D10, D11N, D11R
D10, D11N, D11R
3T2565
SHAFT-BEVEL GEAR
D10, D11N, D11R
D10, D11N, D11R
7T7378
SHAFT
D10, D11N, D11R
D10, D11N, D11R
3P6347
SHAFT
D10, D11N, D11R
D10, D11N, D11R
1501304
SHAFT AS
D11N, D11R
D11N, D11R