SHAFT-TRACK IDLER 1565351 - Caterpillar

Illustration 1 g01210080
(1) Apply a continuous 1 mm (0.04 inch) bead of sealant. The surface of the sealant must be free of oil and grease. (2) Torque for the locknut on the transmission charge pump ... 200 40 N m (150 30 lb ft) (3) The plug must be recessed inside the input drive flange1.25 0.25 mm (0.05 0.01 inch). (4) Apply 4C-9507 Retaining Compound to the plug. (5) Apply a light coat of the lubricant that is being sealed to the inside of the lip seal. Also, apply 4C-9507 Retaining Compound on the outside of the lip seal. (6) Torque for the locknut on the input drive shaft ... 200 40 N m (150 30 lb ft)
Table 1
Pump Test Specifications (1)    
Section    Function    Rotation    Output (Minimum)    RPM    Pressure    
A     Transmission and Torque Converter Scavenge     Clockwise    
120 L/min (31.7 US gpm)     900    
70 kPa (10 psi)    
B     Torque Converter Charging     Clockwise    
177 L/min (46.8 US gpm)     1800    
3200 kPa (464 psi)    
C     Transmission Charging     Clockwise    
100 L/min (26.4 US gpm)     1800    
3200 kPa (464 psi)    
( 1 ) Use SAE 10W oil at 49 deg C (120 deg F) for the bench test.