SHAFT AS-OUTPUT 1645079 - Caterpillar

Removal Procedure
Start By:
Release hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Illustration 1 g01207011
Remove bottom plate (1).
Illustration 2 g01207014
Remove panel (2).
Illustration 3 g01207020
Remove bolts (3) and panel assemblies (4).
Illustration 4 g01207024
Disconnect hose assemblies (5).
Illustration 5 g01207029
Illustration 6 g01207030
Remove bolts (7). Position tube assembly (6) out of the way. Remove bolts (8). Position tube assembly (9) out of the way.
Illustration 7 g01207037
Remove bolts (10) from tube assembly (11).
Illustration 8 g01207046
Remove bolts (12). Remove oil cooler bypass valve (13).