1733392 SHAFT-IDLE Caterpillar parts
320C, 320C FM, 322C
Rating:
Alternative (cross code) number:
CA1733392
173-3392
1733392
CA1733392
173-3392
1733392
Weight: 13 pounds 6 kg.
EXCAVATOR,
You can buy:
US$622.10
29 May 2025
FridayParts
Number on catalog scheme:
42
For full view, you need register
Information:
Removal Procedure
Batteries give off flammable fumes that can explode resulting in personal injury.Prevent sparks near the batteries. They could cause vapors to explode. Do not allow the jump start cable ends to contact each other or the machine.Do not smoke when checking battery electrolyte levels.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.Always wear eye protection when starting a machine with jump start cables.Improper jump start procedures can cause an explosion resulting in personal injury.Always connect the battery positive (+) to battery positive (+) and the battery negative (−) to battery negative (−).Jump start only with an energy source with the same voltage as the stalled machine.Turn off all lights and accessories on the stalled machine. Otherwise, they will operate when the energy source is connected.
Illustration 1 g00556206
Open cover assembly (1).
Illustration 2 g00556218
Remove four locknuts (2) and the washers.
Illustration 3 g00556219
Loosen four terminal assemblies (3). Remove cable assembly (5). Position cable assembly (4) out of the way.
Illustration 4 g00556220
Remove two locknuts (7) and the washers. Remove two frame assemblies (6) from the batteries.
Illustration 5 g00556221
Position a lifting sling through the handles of battery (8), as shown. Secure the lifting sling to a suitable hoist. Remove battery (8) from the platform. The weight of battery (8) is 57 kg (125 lb).
If necessary, repeat Step 5 for the other battery. Installation Procedure
Illustration 6 g00556221
Position a lifting sling through the handles of battery (8), as shown. Secure the lifting sling to a suitable hoist. Install battery (8) onto the platform. The weight of battery (8) is 57 kg (125 lb).
Illustration 7 g00556220
Install two frame assemblies (6) onto the batteries. Install two locknuts (7) and the washers. Tighten locknuts (7) to a torque of 14 2 N m (124 18 lb in).
Illustration 8 g00556219
Position cable assembly (4) and the clips, as shown. Install cable assembly (5), as shown. Tighten terminal assemblies (3) to a torque of 7.2 1.6 N m (64 14 lb in).
Illustration 9 g00556218
Install four locknuts (2) and the washers. Tighten locknuts (2) to a torque of 55 10 N m (40 7 lb ft).
Illustration 10 g00556206
Close cover assembly (1).
Batteries give off flammable fumes that can explode resulting in personal injury.Prevent sparks near the batteries. They could cause vapors to explode. Do not allow the jump start cable ends to contact each other or the machine.Do not smoke when checking battery electrolyte levels.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.Always wear eye protection when starting a machine with jump start cables.Improper jump start procedures can cause an explosion resulting in personal injury.Always connect the battery positive (+) to battery positive (+) and the battery negative (−) to battery negative (−).Jump start only with an energy source with the same voltage as the stalled machine.Turn off all lights and accessories on the stalled machine. Otherwise, they will operate when the energy source is connected.
Illustration 1 g00556206
Open cover assembly (1).
Illustration 2 g00556218
Remove four locknuts (2) and the washers.
Illustration 3 g00556219
Loosen four terminal assemblies (3). Remove cable assembly (5). Position cable assembly (4) out of the way.
Illustration 4 g00556220
Remove two locknuts (7) and the washers. Remove two frame assemblies (6) from the batteries.
Illustration 5 g00556221
Position a lifting sling through the handles of battery (8), as shown. Secure the lifting sling to a suitable hoist. Remove battery (8) from the platform. The weight of battery (8) is 57 kg (125 lb).
If necessary, repeat Step 5 for the other battery. Installation Procedure
Illustration 6 g00556221
Position a lifting sling through the handles of battery (8), as shown. Secure the lifting sling to a suitable hoist. Install battery (8) onto the platform. The weight of battery (8) is 57 kg (125 lb).
Illustration 7 g00556220
Install two frame assemblies (6) onto the batteries. Install two locknuts (7) and the washers. Tighten locknuts (7) to a torque of 14 2 N m (124 18 lb in).
Illustration 8 g00556219
Position cable assembly (4) and the clips, as shown. Install cable assembly (5), as shown. Tighten terminal assemblies (3) to a torque of 7.2 1.6 N m (64 14 lb in).
Illustration 9 g00556218
Install four locknuts (2) and the washers. Tighten locknuts (2) to a torque of 55 10 N m (40 7 lb ft).
Illustration 10 g00556206
Close cover assembly (1).
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LR...
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 323D L, 3...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 319C, 320C, 320C FM, 320C L, 321C, 322C
318C, 319C, 320C, 320C FM, 320C L, 321C
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325B, 325B L, 325C, 325C...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320 L, 320B, 320C, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325 FM L, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D F...
322C, 322C FM, 325C, 325C FM, M325C MH
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
1702222
SHAFT-OUTPUT
320C, 325B L, 325D L, 330C, 345B II, CTV40, G315B, G320, G325B, MP15, MP318, P360, S305, S365B, S365C, VHC-30, VHS-50, VHS-60/3, VHS-60/4, VRG-20/2, VRG-40/2, VRG30, VT30, VT50
320C, 325B L, 325D L, 330C, 345B II, CTV40, G315B, G320, G325B, MP15, MP318, P360, S305, S365B, S365C, VHC-30, VHS-50, VHS-60/3, VHS-60/4, VRG-20/2, VRG-40/2, VRG30, VT30, VT50
2093312
SHAFT-TRACK ROLLER
320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D2, 320E L, 320E LRR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D2, 320E L, 320E LRR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
1614878
SHAFT
574, 574B
574, 574B
1835932
SHAFT
574
574
1884102
SHAFT
330C, 330C L, 345B II, 345B II MH, TK1051, W345B II
330C, 330C L, 345B II, 345B II MH, TK1051, W345B II
1884099
SHAFT
330C, 330C L, 345B II, 345B II MH, TK1051, W345B II
330C, 330C L, 345B II, 345B II MH, TK1051, W345B II
1410222
SHAFT
320D FM, 330, 330 FM L, TK1051
320D FM, 330, 330 FM L, TK1051
330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, TK1051, TK711, TK721, TK722, TK732, W345B II
1290T, 1390, 2491, 2590, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E H...
1838233
SHAFT
320C
320C