SHAFT GP-INPUT 1766465 - Caterpillar

(1) Torque for bolts that hold the half links together. (Use 5P3931 Anti-Seize Compound on bolt threads) ... 90 20 N m (65 15 lb. ft.)Then turn an additional 180°.(2) Torque for bolts that hold track shoes to link. (Use SAE 30W oil on bolt threads) ... 90 20 N m (65 15 lb. ft.)Then turn an additional 120°. Install nut so the radii on the corner is against the link.(3) Distance from the center of one pin to the center of the next pin (pitch) ... 155.58 0.13 mm (6.125 .005 in.) (4) At assembly, install seals as shown.(5) Inside diameter of a new bushing ... 29.13 0.15 mm (1.147 .006 in.)(6) Diameter of a new pin ... 28.58 to 28.68 mm (1.125 to 1.129 in.)(7) Outside diameter of a new bushing ... 46.99 0.25 mm (1.850 .010 in.)