SHAFT-SUN GEAR 1914914 - Caterpillar

INSTALL EXHAUST MANIFOLDS
1. If the exhaust manifold was disassembled, put 5P3931 Anti-Seize Compound on the threads of the bolts and nuts at assembly.2. Fasten a hoist and put exhaust manifold (1) and the gaskets in position on the engine. The gaskets can be fastened to the exhaust manifold ports with tag wire or short 3/8" - 16 NC studs can be used as guide bolts for alignment at assembly.3. Put 5P3931 Anti-Seize Compound on the threads of the bolts and install them to hold the exhaust manifolds to the cylinder heads. Tighten the bolts to a torque of 45 7 N m (32 5 lb ft)4. Install bracket (2) to hold the rear of the exhaust manifold in position.end by:a) install turbochargersb) install air intake shutoff (3508)