SHAFT AS.- 1986026 - Caterpillar

Illustration 1 g06072990
Table 1
Item Qty Part Specification Description
A - - Protrusion of two dowels (2) from the surface of the differential housing (1) is 3.60 0.10 mm (0.142 0.004 inch)
B - - Protrusion of four dowels (4) from the surface of the differential housing (1) is 3.96 0.05 mm (0.156 0.002 inch)
C - - Protrusion of two dowels (6) from the surface of the differential housing (5) is 3.60 0.10 mm (0.142 0.004 inch)
7 4 4D-7536 Locknut Torque for locknuts is 70 15 N m (52 11 lb ft).
Rotate roller bearing assembly (3) while you are tightening the nut (7). This procedure will ensure proper seating of rollers.
8 8 8T-0656 Bolt Before assembly, apply Loctite 243 to the threads.Tighten bolts to 350 50 N m (258 37 lb ft) and then rotate all bolts to an additional angle of 60 5 degrees.
- - - Refer to the Testing and Adjusting, "Differential Pinion Bearing - Adjust" for the correct adjustment procedure.