1994607 SHAFT-PLANETARY Caterpillar parts
385B, 5090B
Rating:
Alternative (cross code) number:
CA1994607
199-4607
1994607
CA1994607
199-4607
1994607
Weight: 6 pounds 2 kg.
EXCAVATOR, FRONT SHOVEL,
Number on catalog scheme:
41
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1 Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02380216
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02395316Note: The check valve is located behind the counterweight.
Remove check valve (1).
Illustration 3 g02395317
Remove O-ring seal (6), backup ring (5), backup rings (3), O-ring seal (4), and O-ring seal (2). Installation Procedure
Install check valve (1) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1 Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02380216
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02395316Note: The check valve is located behind the counterweight.
Remove check valve (1).
Illustration 3 g02395317
Remove O-ring seal (6), backup ring (5), backup rings (3), O-ring seal (4), and O-ring seal (2). Installation Procedure
Install check valve (1) in the reverse order of removal.
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
1912502
SHAFT-PINION
385B, 5090B
385B, 5090B
345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, W345C MH
1931414
SHAFT
5110B
5110B
1264968
SHAFT AS-ROLLER
5110B
5110B
2307154
SHAFT
5110B
5110B
1231227
SHAFT
5110B
5110B
1763241
SHAFT AS-TRACK
365B II, 385B, 5090B
365B II, 385B, 5090B
2024902
SHAFT
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B
1994690
SHAFT-PLANETARY
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1994689
SHAFT-PLANETARY
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1994688
SHAFT-PLANETARY
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1994648
SHAFT-PLANETARY
385B, 5090B
385B, 5090B