SHAFT A. 1M3324 - Caterpillar

Table 1
Calibration Submodes    
Calibration Submode    Description of Submode    
60     Transmission Fill Calibration    
61     Neutralization setpoint Calibration    
62     Neutralization Setpoint Adjustment    Caterpillar Electronic Technician (Cat ET)
Illustration 1 g00777826
Caterpillar Electronic Technician (CatET) is a software program that is used to access data. The service technician can use Cat ET in order to perform maintenance on the machine. Some of the options that are available with Cat ET are listed below:
View diagnostic codes. See Troubleshooting, "Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes".
Viewing active event codes and logged event codes
View the status of parameters.
Clear active diagnostic codes and clear logged diagnostic codes
Perform calibration of machine systems.
Program the ECM (Flash). Use the "WINflash" program. See Testing and Adjusting, "Electronic Control Module (ECM) - Flash Program".
Print reports.The following list contains some of the diagnostic functions and programming functions that are performed by the service tools.
The failures of the ECM system are displayed.
The status of most of the inputs and the outputs are displayed.
The settings for the ECM are displayed.
Display the status of the input and output parameters in real time.
Display the clock hour of the internal diagnostic clock.
The number of occurrences and the clock hour of the first occurrence and the last occurrence is displayed for each logged diagnostic code.
The definition for each logged diagnostic code and each event is displayed.
Load new FLASH software.See Troubleshooting, "Diagnostic Code List" for the list of diagnostic codes for the ECM.
Active diagnostic codes
Logged diagnostic codesEvent Codes
When an abnormal operating condition of the "power train" occurs, the status screen on the Cat ET indicates that there is an active event code. Some event codes are logged in the ECM memory. Some event codes are active only.Event codes are displayed on Cat ET in the following format:EXXXX (X)The E means that the code is an event code. The XXXX is a numeric identifier of the event. The (X) is the warning level for the event code. Beside the numeric identifier and warning level is a description of the event.Active event codes are listed in ascending numerical order. The code with the lowest number is listed first. The active event code is removed from the list when the condition is no longer present.Logged Event CodesLogged event codes are listed in chronological order, with the most recent code listed first.Following the event code description, Cat ET will display the number of occurrences of the logged event. Also a time stamp of the first and last occurrence of the logged event is listed.Note: A good practice is to clear the logged event codes after investigating and correcting the problem which generated the code.Warning Levels For Event Codes
Table 2
OPERATION    
Level     Action Alarm     Action Indicator     Advisor Display
Pop Up Message    
Level 1     OFF     OFF     ON    
Level 2     OFF     Flash ON and Off.     ON    
Level 3     Pulse ON and OFF.     Flash ON and OFF.     ON    Recommended actions