SHAFT 1T1342 - Caterpillar

The Work Light On / Off button (14) allows the operator to turn the work lights on and off. When the Work Light Select Button (13) is pressed, the user interface program takes the operator to the Work Light Select screen.
Illustration 41 g03886940The Work Light Select screen is accessible when the Work Light Select Button (13) is pressed. The Work Light Select screen allows the operator to select an individual work light to turn on or off as needed.Operator Station Controls and Machine Response
Operator Station Remote Shutdown Switch
The Operator Station Remote Shutdown Switch is used to shut down the machine electronic controls in an emergency. The Shutdown command causes the Machine to be placed into commanded stop Mode. Remote Shutdown Mode is a subset of RC Reserved.The following will be observed on the Operator Station:
The Machine is brought to a controlled stop, park brake and implement are locked, Engine is brought to low idle.
The "Remote Control Status Indicator / Reason For Last Stop Field" will show "Command Stop" for the last stop activated for the system.
The Machine Remote indicators will be Solid Blue, Flashing Red.
An event is logged by the RCM and Operator Station when the Operator Station Remote Shutdown Switch is used to shut down the machine.Implement Controls
The Implement Controls of the Operator Station are listed here:
Implement Control Blade Control (raise/ lower, tilt left/right, pitch forward/back, float)
Single/Dual Tilt Blade Mode (assuming dual tilt is installed on machine)
Auto Blade Assist Mode (If installed)
AutoRip if installed and equipped (AMA, ; JEL, ; JNS, and ; MDG only)
Implement Control / Ripper Control (raise/ lower, in/out, AutoStow, AutoRip ) (if installed and enabled)
Implement Select Switch (trigger on Implement handle)
Implement LockoutThe implement commands from the Operator Station are sent to the Remote Control ECM. The Remote Control ECM then relays the implement commands to the machine Implement ECM via the machine CAN circuit. The system utilizes the existing implement system of