SHAFT AS 1V6349 - Caterpillar

Removal Procedure
Start By:
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Remove the engine bottom guards. Refer to Disassembly and Assembly, "Bottom Guard (Engine) - Remove and Install".
Illustration 1 g03321246
Remove three bolts (1), five bolts (2), bolt (4) and guard assembly (3).
Illustration 2 g01157888
Release the tension and remove three V-belts (5).
Illustration 3 g01155538
Remove jam nut (9).
Remove locknut (6).
Remove spring (7).
Remove four bolts (10) and shaft assembly (8) from the engine.
Illustration 4 g01155535
Remove pin (14), cotter pin (12), retainer (13) and washer (11) from spring (7).
Illustration 5 g01155537
Remove bolt (15) and washer (16).
Illustration 6 g01155825
Remove arm assembly (17) from shaft assembly (8).
Illustration 7 g01155841
Remove four bolts (18) and cover (19).
Illustration 8 g01155907
Remove gasket (20).
Illustration 9 g01155914
Remove bolt (21) and two washers (22).
Remove pulley (23) from arm assembly (17).
Illustration 10 g01155927
Remove spacer (24) and lip seal (25).
Illustration 11 g01155934
Remove ball bearing (26).
Illustration 12 g01155935
Remove spacer (27).
Illustration 13 g01155936
Remove ball bearing (28).
Illustration 14 g01155939
Remove retainer ring (29).