SHAFT 2238894 - Caterpillar

Introduction
Block Diagram - Generator Set With EMCP II+Location Of EMCP II+ System Components
Instrument Panel (1) GSC+; generator set control +.(2) GS; governor switch (optional). or SP; speed potentiometer (optional).(3) SAS; start aid switch (optional).(4) ECS; engine control switch.(5) ALM; alarm module (optional).(6) CAM; custom alarm module (optional). or SLM; synchronizing lights module (optional).(7) PLS; panel light switch (optional).(8) ESPB; emergency stop push button.(9) VAR; voltage adjust rheostat.Most of the EMCP II+ components are located on either the instrument panel or on the sub-panel. Other EMCP II+ components that exist on or near the engine are: engine oil pressure sensor (EOPS), engine coolant temperature sensor (ECTS), engine oil temperature sensor (EOTS) (optional), magnetic speed pickup (MPU) and engine coolant loss sensor (ECLS) (optional).
Panel Interior - Instrument Panel and Sub-Panel
Instrument Panel:(1) GSC+; generator set control +.(2) GS; governor switch (optional). or SP; speed potentiometer (optional).(3) SAS; start aid switch (optional).(4) ECS; engine control switch.(5) ALM; alarm module (optional).(6) CAM; custom alarm module (optional). or SLM; synchronizing lights module (optional).(7) PLS; panel light switch (optional).(8) ESPB; emergency stop push button.(9) VAR; voltage adjust rheostat.(10) RM; relay module (part of GSC+).
Sub-Panel:(11) AUX; auxiliary terminal strip.(12) EG; electronic governor (optional).(13) ATB+; AC transformer box +.(14) FCTM; fuel control timer module (ETS only).(15) CB2; circuit breaker 2.(16) KWR; kilowatt level relay.(17) ENFR; engine failure relay (optional).(18) AUXREL; auxiliary relay (optional).(19) SMMS1; starting motor magnetic switch 1.(20) SMMS2; starting motor magnetic switch 2 (optional).(21) F11; fuse 11.(22) SR; slave relay (ETR only).(23) GPHI; ground post high voltage.(24) EFCR; emergency fuel control relay (ETS only). or AFCR; auxiliary fuel control relay.(25) F16; fuse 16.(26) F12; fuse 12.Component Description
Generator Set Control + (GSC+)
Display Area Of Generator Set Control + (GSC+)
(1) Dedicated shutdown indicators. (2) Spare fault indicators. (3) Fault shutdown indicator. (4) Fault alarm indicator. (5) Upper display. (6) Lower display. (7) Keypad.The main component of the EMCP II+ system is the generator set control + (GSC+). The GSC+ is designed to operate when powered by only 24 DCV or 32 DCV battery systems. The GSC+ monitors and controls many of the generator set (genset) functions. The functions and features of the GSC+ are:* Provides generator AC output information including power metering.* Controls starting and stopping of the engine.* Shows engine conditions and generator output information on two displays. The displays also show fault codes and GSC+ programming information.* Monitors the system for faults. If a fault occurs, the GSC+ performs a controlled fault shutdown or provides a fault alarm annunciation. The GSC+ uses indicators and displays to describe the fault to the operator or service technician.* Contains programmable features for certain applications or customer requirements. In order to ensure proper operation on MUI engines, the GSC+ setpoint P023 must be set to 0. Failure to do this can result in improper engine operation, incorrect display of engine parameters and logging an erroneous CID 590 fault. For more information on the P023 setpoint and other GSC+ setpoints, see Engine/Generator Programming OP5-0 within the topic Service Mode.GSC+ Part