SHAFT 2264356 - Caterpillar

3. Remove rocker shaft assembly (1).4. Remove push rods (2).Install Rocker Shaft, Arms And Push Rods
1. Install the push rods.2. Put 9M3710 Anti-Seize Compound on the threads of bolts for rocker shaft.3. Put the rocker shaft and arms into position on cylinder head and push rods. Install the bolts and washers.
The dowel pins (1) on each end of rocker shaft and arms must be in alignment with holes (2) in cylinder head. If the pins and holes are not in alignment when bolts are tightened, damage to the rocker shaft and arms may result.
4. Tighten the bolts 1, 2, 3, 4, 5, and 6 using the following method: a) Tighten the bolts in number order to 115 lb.ft. (15,9 mkg).b) Tighten the bolts in number order to 175 5 lb.ft. (24,2 0,7 mkg).c) Tighten the bolts (hand torque only) in number order to 175 5 lb.ft. (24,2 0,7 mkg).5. Make an adjustment to the rocker arms so the clearance for inlet valves will be .015 in. (0,38 mm) and the clearance for exhaust valves will be .025 in. (0,64 mm).6. Install the elbow and support assembly for the air cleaner.end by: a) install valve cover