SHAFT GP-AXLE 2385297 - Caterpillar

HIGH PRESSURE CYLINDERDo not remove any valve, hydraulic fitting, or valve core, nor disassemble any parts until pressure has been relieved or personal injury may occur.To relieve pressure:Shut off engine and wait five minutes for hydraulic system pressure to dissipate.Relieve gas pressure in the accumulator cylinder by opening the charging valve one turn only.Charge cylinder with dry nitrogen gas.Precharge pressure _______ PSI _______kPa.Service pressure (Operating-Loaded) ______PSI ______kPa.Minimum bursting pressure _____PSI _____kPa.See your Caterpillar dealer for tools and detailed information required for charging cylinders.
The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.Caterpillar products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Illustration 1 g00766581
This plate is located on the left side of the front loader frame.Machine PIN____________________
Illustration 2 g00766626
This plate is located on the transfer gear case.Transmission Serial Number____________________
Illustration 3 g00766631
This plate is located on the top of the engine.Engine Serial Number____________________Certification Plate (CE)
Note: This plate is on machines that are used in the European Union.The certification plate (CE) is used to verify a product's conformance to all of the requirements that were established by a country or by a group of countries. The product is tested by a testing group in order to verify conformance.
Illustration 4 g00766668
This plate is located on the left side of the front frame.PIN ____________________Model ____________________Power (kW) ____________________Weight (kg) ____________________