2677061 SHAFT AS-STEER Caterpillar parts
980G II, 980H
Rating:
Alternative (cross code) number:
CA2677061
267-7061
2677061
CA2677061
267-7061
2677061
Weight: 16 pounds 7 kg.
WHEEL LOADER,
Number on catalog scheme:
68
For full view, you need register
Information:
Probable Causes
Electronic Control Module (ECM)
Electrical connectors
Data link communications
Keyswitch powerRecommended Actions
ECM
Connect Caterpillar Electronic Technician (ET). If the ECM does not communicate with Cat ET, refer to Troubleshooting, "Electronic Service Tool Does Not Communicate".Note: This application utilizes dual data link communications for communicating with Cat ET. Some functionality will not be available if a single data link is being used for communications with the ECM.Electrical Connectors
Check for correct installation of the J1/P1 and J2/P2 ECM connectors. Check for correct installation of all other applicable connectors. Refer to Troubleshooting, "Electrical Connectors - Inspect".Data Link Communications
Verify that the Cat Data Link and the CAN data link do not have an open or short circuit. Refer to Troubleshooting, "Data Link - Test" if a problem with communications via the data links is suspected.Keyswitch Power
Ensure that keyswitch power is being provided to all of the modules that are on the application. Refer to Troubleshooting, "Electrical Power Supply - Test" for information that is related to troubleshooting the engine's keyswitch circuit.
Electronic Control Module (ECM)
Electrical connectors
Data link communications
Keyswitch powerRecommended Actions
ECM
Connect Caterpillar Electronic Technician (ET). If the ECM does not communicate with Cat ET, refer to Troubleshooting, "Electronic Service Tool Does Not Communicate".Note: This application utilizes dual data link communications for communicating with Cat ET. Some functionality will not be available if a single data link is being used for communications with the ECM.Electrical Connectors
Check for correct installation of the J1/P1 and J2/P2 ECM connectors. Check for correct installation of all other applicable connectors. Refer to Troubleshooting, "Electrical Connectors - Inspect".Data Link Communications
Verify that the Cat Data Link and the CAN data link do not have an open or short circuit. Refer to Troubleshooting, "Data Link - Test" if a problem with communications via the data links is suspected.Keyswitch Power
Ensure that keyswitch power is being provided to all of the modules that are on the application. Refer to Troubleshooting, "Electrical Power Supply - Test" for information that is related to troubleshooting the engine's keyswitch circuit.
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
2973031
SHAFT
988H, 988K
988H, 988K
2316047
SHAFT-AXLE
966G II, 966H, 966K, 972G II, 972H, 972K
966G II, 966H, 966K, 972G II, 972H, 972K
1072892
SHAFT-DRIVE
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
9U2963
SHAFT-AXLE
844, 844H, 844K, 990, 990 II, 990H, 990K
844, 844H, 844K, 990, 990 II, 990H, 990K
1744461
SHAFT
988G
988G
1756801
SHAFT-PUMP
824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 836G, 966G, 972G, 980G, 980G II, 988G
824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 836G, 966G, 972G, 980G, 980G II, 988G
2007914
SHAFT AS
814F, 814F II, 815F, 815F II, 816F, 816F II, 824K, 825K, 826K, 834K, 836K, 844H, 844K, 854K, 988K, 990H, 990K, 992K, 993K, 994F, 994H
814F, 814F II, 815F, 815F II, 816F, 816F II, 824K, 825K, 826K, 834K, 836K, 844H, 844K, 854K, 988K, 990H, 990K, 992K, 993K, 994F, 994H
2514630
SHAFT AS
824K, 825K, 826K, 834K, 836K, 844H, 844K, 854K, 950K, 962K, 966K, 972K, 980K, 980K HLG, 988K, 990H, 990K, 992K, 993K, 994F, 994H
824K, 825K, 826K, 834K, 836K, 844H, 844K, 854K, 950K, 962K, 966K, 972K, 980K, 980K HLG, 988K, 990H, 990K, 992K, 993K, 994F, 994H
3033025
SHAFT
972H, 980H
972H, 980H
2008627
SHAFT AS-OUTPUT
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 836, 980F, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 988B, 988F, 988F II, AD30, D350E, D350E II, D40...
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 836, 980F, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 988B, 988F, 988F II, AD30, D350E, D350E II, D40...
3059001
SHAFT AS-INPUT
824G II, 824H, 825G II, 825H, 826G II, 826H, 980H, 980K, 980K HLG, 980M, 982M
824G II, 824H, 825G II, 825H, 826G II, 826H, 980H, 980K, 980K HLG, 980M, 982M
824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 980H, 980K, 980K HLG, 980M, 982M