SHAFT-YM 2755281 - Caterpillar

PREPARING TO REMOVE WATER TEMPERATURE REGULATOR
1-Bolts. 2-Elbow assembly.
WATER TEMPERATURE REGULATOR REMOVAL
1-Seal. Install seal with lip toward top of cover. 2-Washer. Install washer under temperature regulator.Water Pump Disassembly And Assembly
Refer to SERVICE GUIDE for Preliminary Information.FT637 Seal Installation Tool.Use FT637 Seal Installation Tool to install water pump seals. One end is used to install the grease seal (2) and the other end to install the water seal (1).
WATER PUMP DISASSEMBLY AND ASSEMBLY
1-Spring. 2-Grease seal.Fan Drive
Refer to SERVICE GUIDE for Preliminary Information.
FAN DRIVE DISASSEMBLY AND ASSEMBLYRadiator Removal
Refer to SERVICE GUIDE for Preliminary Information.
PREPARING TO REMOVE RADIATOR
1-Radiator cover.
RADIATOR REMOVAL
2-Elbow. 3-Radiator water pressure line. 4-Shield retaining bolts (six). 5-Bolts (two).
RADIATOR REMOVAL
6-Bolts (two on each side). 7-Radiator outlet elbow bolts (four).
REMOVING RADIATORRadiator Disassembly And Assembly
RADIATOR DISASSEMBLY AND ASSEMBLY