SHAFT-DRIVE 2788748 - Caterpillar

Illustration 1 g00288167 (1) Put 4C-5593 Anti-Seize Compound on the threads of the bolts. These bolts hold the cover and the housing to the case. Tighten the bolts evenly in small increases. Torque ... 80 N m (60 lb ft) (2) Bolts Torque ... 36 N m (27 lb ft) (3) Bolts Torque ... 78 N m (60 lb ft) (4) Bolt Torque ... 110 N m (80 lb ft) (5) Tighten the nut until the clearance between the rear end plate and the rotor is the following value. ... 0.03 to 0.08 mm (0.001 to 0.003 inch)Check the clearance again after the bolt for the clamp nut is tightened. (6) Bolt Torque ... 120 N m (90 lb ft)