SHAFT 2D0835 - Caterpillar

Illustration 1 g06335950
Table 1
Item Qty Part Specification Description
1 4 512-2432 Bellows As Do not reuse the bellows assembly.
2 4 214-6050 Clamp Torque to 20 1 N m (177 9 lb in).
Do not reuse the clamp.
3 4 306-1720 Band Clamp Torque to 20 1 N m (177 9 lb in).
Do not reuse the clamp.
4 4 5P-3961 Bolt Use the following procedure to tighten the bolts:
1. Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
2. Torque to 50 5 N m (37 4 lb ft).
5 16 391-2167 Flange Locknut Torque to 55 10 N m (41 7 lb ft).
6 44 5P-3875 Bolt Use the following procedure to tighten the bolts:
1. Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
2. Torque to 50 5 N m (37 4 lb ft).
7 32 5P-3345 Bolt Use the following procedure to tighten the bolts:
1. Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
2. Opposite bolts are snug diagonally to seat the exhaust seal uniformly.
3. Torque to 55 5 N m (41 4 lb ft).
8 8 5P-3345 Bolt Use the following procedure to tighten the bolts:
1. Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
2. Torque to 50 5 N m (37 4 lb ft).