SHAFT 2P3598 - Caterpillar

The 3500C and the 3500C High Displacement Generator Sets consist of an engine, a generator, and control systems.Intended Use
This Power Generator is used to generate electrical power.Engine Description
3500C Engines are electronically controlled. The engines have electronic fuel injectors. The engines can be equipped with either jacket water aftercooling or separate circuit aftercooling. The engine is offered in an 8 cylinder engine, a 12 cylinder engine, and a 16 cylinder engine.3500C High Displacement Engines are electronically controlled. The engines have electronic fuel injectors. The engines are equipped with separate circuit aftercooling. The engine is offered in a 12 cylinder engine, and a 16 cylinder engine.Engine efficiency and engine performance depend on adherence to proper operation and maintenance recommendations. Use the recommended fuels, lubrication oils, and coolant. Pay special attention to the air cleaner, to the fuel system, to the lubrication system, and to the cooling system maintenance. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for more information on maintenance items.Generator Description
The SR500 brushless generator can be used with the following loads: mixed loads of motors and lights, SCR-controlled equipment, computer centers, installations of communications and petroleum drilling applications.The generator set packages can be utilized for prime power generation or standby power generation.SR500 generators are utilized in three-phase full-wave excitation and regulation. The generators are either 4 pole or 6 pole designs with 6 lead configurations or 12 lead configurations. The generators can produce electrical power in either 50 Hz or 60 Hz applications.