3551350 SHAFT AS Caterpillar parts
D6R, D6R III
Rating:
Alternative (cross code) number:
CA3551350
355-1350
3551350
CA3551350
355-1350
3551350
Weight: 330 pounds 149 kg.
TRACK-TYPE TRACTOR,
Number on catalog scheme:
5
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 154-9731 Thread Lock Compound -
B 8T-9022 Silicone Gasket -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01097924
Thoroughly clean the mating surfaces of the plate and front housing (13) .Note: The mating surfaces of the plate and the front housing must be free of oil, fuel, water, dirt, assembly compounds, and any other contaminants during assembly.
Install a new gasket (15) on the plate.Note: Trim the gasket even with the bottom of the front housing after assembly.
Apply Tooling (B) to the bottom of gasket (15) in order to fill the space at the front housing and the engine oil pan.
Install front housing (13) on the dowel pins on the cylinder block.
Install bolts (14) that fasten the engine oil pan to the front housing.
Install bolts (12) .
Install bolt (10) and nut (9) .
Install nuts (11) .
Position strap (8) and install bolts (7) .
Illustration 2 g01097597
Position bracket (3) and install bolts (2) .
Install bolts (1) .
Install nut (4) on the stud.
Install bolts (5) that fasten the adapter and fuel transfer pump (6) to the plate.End By:
Install the engine support. Refer to Disassembly and Assembly, "Engine Support (Front) - Remove and Install".
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".
Install the air compressor, if equipped. Refer to Disassembly and Assembly, "Air Compressor - Install".
Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 154-9731 Thread Lock Compound -
B 8T-9022 Silicone Gasket -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01097924
Thoroughly clean the mating surfaces of the plate and front housing (13) .Note: The mating surfaces of the plate and the front housing must be free of oil, fuel, water, dirt, assembly compounds, and any other contaminants during assembly.
Install a new gasket (15) on the plate.Note: Trim the gasket even with the bottom of the front housing after assembly.
Apply Tooling (B) to the bottom of gasket (15) in order to fill the space at the front housing and the engine oil pan.
Install front housing (13) on the dowel pins on the cylinder block.
Install bolts (14) that fasten the engine oil pan to the front housing.
Install bolts (12) .
Install bolt (10) and nut (9) .
Install nuts (11) .
Position strap (8) and install bolts (7) .
Illustration 2 g01097597
Position bracket (3) and install bolts (2) .
Install bolts (1) .
Install nut (4) on the stud.
Install bolts (5) that fasten the adapter and fuel transfer pump (6) to the plate.End By:
Install the engine support. Refer to Disassembly and Assembly, "Engine Support (Front) - Remove and Install".
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".
Install the air compressor, if equipped. Refer to Disassembly and Assembly, "Air Compressor - Install".
Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
1090, 1140, 1150, 1160, 1190, 1190T, 120M, 120M 2, 1290T, 12E, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1673, 1673B,...
30/30, 35, 45, 55, 583T, D5R LGP, D6H, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, D9R, D9T...
30/30, 35, 45, 55, 583T, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, ...
30/30, 583T, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, DEUCE, PL83
627G, 637G, 973C, C-9, D6R, D6R II, D6R III, D6R STD, D6T, D7R XR
583T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, PL83
D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
578, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980M, D6H, D6H ...
572R, 572R II, 578, 583R, 583T, 587R, 587T, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 980F II, 980...
572R, 572R II, 578, 583R, 583T, 587R, 587T, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 980F II, 980...
572R, 572R II, 578, 583R, 587R, 587T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, PL87
D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
2899403
SHAFT AS-PIVOT
D6R, D6R III
D6R, D6R III
3324797
SHAFT AS
D6T LGP, D6T XL
D6T LGP, D6T XL
3324791
SHAFT AS
D6T LGP, D6T XL
D6T LGP, D6T XL
3324788
SHAFT AS-PIVOT
D6T LGP, D6T XL
D6T LGP, D6T XL
3407766
SHAFT & BEARING AS
D5R LGP, D6N, D6N LGP, D6N OEM
D5R LGP, D6N, D6N LGP, D6N OEM
2716222
SHAFT AS
D6N, D6N LGP
D6N, D6N LGP
3876410
SHAFT
PL83, PL87
PL83, PL87
3876413
SHAFT-MOTOR
PL83, PL87
PL83, PL87
3876411
SHAFT
PL83, PL87
PL83, PL87
3996032
SHAFT-DRIVE
980M, 982M, D9T, PL83
980M, 982M, D9T, PL83
3180157
SHAFT
D6R, D6R STD, D7R XR
D6R, D6R STD, D7R XR
3173934
SHAFT
D6R, D6R STD, D7R XR
D6R, D6R STD, D7R XR