3596207 SHAFT-SPEED DRIVE Caterpillar parts
793F, 793F CMD, 793F-XQ
Rating:
Alternative (cross code) number:
CA3596207
359-6207
3596207
CA3596207
359-6207
3596207
Weight: 1 pounds 0 kg.
TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
3596207 504013086 5040130860 Turbocharger HX50W Turbo for Iveco Cursor 13 Engine
HIRINTOL ▶️REFERENCE PART NUMBER: 3596207, 504013086, 5040130860. || ▶️APPLICATION: for Iveco Cursor 13 Engine. || ▶️FUNCTION: A supercharger is a mechanical device that increases the intake pressure of a vehicle's engine, thereby increasing engine output and torque. || ▶️MATERIAL: High-strength aluminum alloy is usually used as the main material, which has high strength and corrosion resistance. || ▶️MAINTENANCE: Although a supercharger can improve engine performance to a certain extent, it will also increase fuel consumption and other issues, so it needs reasonable use and maintenance.
HIRINTOL ▶️REFERENCE PART NUMBER: 3596207, 504013086, 5040130860. || ▶️APPLICATION: for Iveco Cursor 13 Engine. || ▶️FUNCTION: A supercharger is a mechanical device that increases the intake pressure of a vehicle's engine, thereby increasing engine output and torque. || ▶️MATERIAL: High-strength aluminum alloy is usually used as the main material, which has high strength and corrosion resistance. || ▶️MAINTENANCE: Although a supercharger can improve engine performance to a certain extent, it will also increase fuel consumption and other issues, so it needs reasonable use and maintenance.
PumpShark Turbo Turbocharger 504013086 5040130860 3596207 2836655 2836659 3596206 3796923 4033762 4033762H New HX50W For Iveco Cursor 13 Engine
PumpShark ▶Part Number:3596207 504013086 5040130860 || ▶Application:For Iveco Cursor 13 Engine || ▶High quality durability material and excellent crafts, provide a reliable operation and longer service life of this item. || ▶Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time. || ▶Construction machinery product must be in accordance with operating procedures.We will provide matching product usage guidance and professional product operation suggestions.
PumpShark ▶Part Number:3596207 504013086 5040130860 || ▶Application:For Iveco Cursor 13 Engine || ▶High quality durability material and excellent crafts, provide a reliable operation and longer service life of this item. || ▶Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time. || ▶Construction machinery product must be in accordance with operating procedures.We will provide matching product usage guidance and professional product operation suggestions.
Number on catalog scheme:
15
For full view, you need register
Information:
Removal Procedure
Illustration 1 g00536875
Illustration 2 g00536876
Position the machine on an incline, as shown. Block the front of the machine and apply the service brake.
Lower ripper shank (1) onto blocks, as shown. Retract shank pin (2) .
Slowly raise the ripper frame until first bore (3) on ripper shank (1) will clear the carriage.
Illustration 3 g00536919
To prevent possible personal injury during removal of the ripper shank, keep away from the area around the lift truck. The ripper shank may fall off the forks of the lift truck during the removal procedure.
Install pin (4) in bore (3), as shown. Position the forks on the lift truck on each side of the ripper shank, as shown. Secure the ripper shank to the carriage of the lift truck.
Raise ripper shank (1) off the blocks with a lift truck and remove the blocks.
Lower ripper shank (1) to the ground with the lift truck.
Raise the ripper frame until ripper shank (1) will clear the carriage. Use a lift truck to remove ripper shank (1). The weight of the ripper shank is approximately 1352 kg (2975 lb).Installation Procedure
Illustration 4 g00536919
Position the machine on an incline. Block the front of the machine and apply the service brake.
Install pin (4) in the bore, as shown. Position the forks on the lift truck on each side of the ripper shank, as shown. Secure the ripper shank to the carriage of the lift truck.
Raise the ripper frame until ripper shank (1) will clear the carriage. Use a lift truck to install ripper shank (1). The weight of the ripper shank is approximately 1352 kg (2975 lb).
Raise ripper shank (1) into position with the lift truck.
Illustration 5 g00536876
Illustration 6 g00536875
Slowly lower the ripper frame until bore (3) is in alignment.
Extend shank pin (2) .
Illustration 1 g00536875
Illustration 2 g00536876
Position the machine on an incline, as shown. Block the front of the machine and apply the service brake.
Lower ripper shank (1) onto blocks, as shown. Retract shank pin (2) .
Slowly raise the ripper frame until first bore (3) on ripper shank (1) will clear the carriage.
Illustration 3 g00536919
To prevent possible personal injury during removal of the ripper shank, keep away from the area around the lift truck. The ripper shank may fall off the forks of the lift truck during the removal procedure.
Install pin (4) in bore (3), as shown. Position the forks on the lift truck on each side of the ripper shank, as shown. Secure the ripper shank to the carriage of the lift truck.
Raise ripper shank (1) off the blocks with a lift truck and remove the blocks.
Lower ripper shank (1) to the ground with the lift truck.
Raise the ripper frame until ripper shank (1) will clear the carriage. Use a lift truck to remove ripper shank (1). The weight of the ripper shank is approximately 1352 kg (2975 lb).Installation Procedure
Illustration 4 g00536919
Position the machine on an incline. Block the front of the machine and apply the service brake.
Install pin (4) in the bore, as shown. Position the forks on the lift truck on each side of the ripper shank, as shown. Secure the ripper shank to the carriage of the lift truck.
Raise the ripper frame until ripper shank (1) will clear the carriage. Use a lift truck to install ripper shank (1). The weight of the ripper shank is approximately 1352 kg (2975 lb).
Raise ripper shank (1) into position with the lift truck.
Illustration 5 g00536876
Illustration 6 g00536875
Slowly lower the ripper frame until bore (3) is in alignment.
Extend shank pin (2) .
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
3087037
SHAFT AS
793F
793F
4308140
SHAFT-IDLER
793F, 793F CMD, 793F OEM, 795F AC, 795F XQ
793F, 793F CMD, 793F OEM, 795F AC, 795F XQ
3298190
SHAFT-IDLER
793F, 793F AC, 793F-XQ
793F, 793F AC, 793F-XQ
3175011
SHAFT-IDLER
793F
793F
2896329
SHAFT AS
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ
3248922
SHAFT
793F
793F
3248921
SHAFT
793F
793F
3248919
SHAFT
793F
793F
3248918
SHAFT
793F
793F
3248916
SHAFT
793F
793F
3248915
SHAFT
793F
793F