3658194 SHAFT-STUB Caterpillar parts
CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
Rating:
Alternative (cross code) number:
CA3658194
365-8194
3658194
CA3658194
365-8194
3658194
Weight: 14 pounds 6 kg.
COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
![Brake X Replacement Brake Rotors Kit replacement for Chevrolet Spark 1.4 2016 2017 2018 2019 | Aegis GEOMET Coated Front Rotors [Front]](http://c1.a2109.com/_150/aws_api/51k/51kb-/51kb-tbapwl.jpg)
Brake X Replacement Brake Rotors Kit replacement for Chevrolet Spark 1.4 2016 2017 2018 2019 | Aegis GEOMET Coated Front Rotors [Front]
Brake X Get The Right Fit: The front brake rotors kit are for 2016 2017 2018 2019 Spark || 2 Piece Brake Rotors Kit Replacement: Each brake rotor kit comes with 2 GEOMET coated front brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || Heavy Duty Construction: Our coated brake rotors kit is made using G3000 grade cast iron to offer just the right balance of performance, quality and affordability. It’s resistant to rust and corrosion, built for OEM specifications, and can be installed without any modifications. || Smoothened and Balanced: Our rotors are double disc smoothened and mill balanced to help prevent cracking. The Brake X Rotors kit are engineered to elevate your driving experience and to back you up at your every turn. || Quality That Matters: Our car part replacement kits are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects and that we have your back as go make every turns.
Brake X Get The Right Fit: The front brake rotors kit are for 2016 2017 2018 2019 Spark || 2 Piece Brake Rotors Kit Replacement: Each brake rotor kit comes with 2 GEOMET coated front brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || Heavy Duty Construction: Our coated brake rotors kit is made using G3000 grade cast iron to offer just the right balance of performance, quality and affordability. It’s resistant to rust and corrosion, built for OEM specifications, and can be installed without any modifications. || Smoothened and Balanced: Our rotors are double disc smoothened and mill balanced to help prevent cracking. The Brake X Rotors kit are engineered to elevate your driving experience and to back you up at your every turn. || Quality That Matters: Our car part replacement kits are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects and that we have your back as go make every turns.
$75.56
12 Feb 2024
US: Super Brakes
Brake X Replacement Brake Rotors Kit replacement for Chevrolet Spark 1.4 2016 2017 2018 2019 | Aegis GEOMET Coated Front Rotors [Front]
BRAKE X 2 Piece Brake Rotors Kit Replacement: Each brake rotor kit comes with 2 heavy duty brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || GEOMET Coated: Our automotive replacement brake rotors is made using heavy duty G3000 grade cast iron and GEOMET coated to offer just the right balance of rust and corrosion resistant performance, strength, quality and affordability. || Smoothened and Balanced: Our disc brakes are double disc smoothened and mill balanced to help prevent cracking and build up. The front brakes are engineered to elevate your driving experience and to back you up at your every turn. || Quality that Matters: The car brake rotors front are precisely cut to provide a secure and proper fit, individually inspected, and made following strict quality control guidelines to help maintain safety and deliver consistent stopping power without any fading. || Engineered in Canada: Our front brake kits are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as go make every turns.
BRAKE X 2 Piece Brake Rotors Kit Replacement: Each brake rotor kit comes with 2 heavy duty brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || GEOMET Coated: Our automotive replacement brake rotors is made using heavy duty G3000 grade cast iron and GEOMET coated to offer just the right balance of rust and corrosion resistant performance, strength, quality and affordability. || Smoothened and Balanced: Our disc brakes are double disc smoothened and mill balanced to help prevent cracking and build up. The front brakes are engineered to elevate your driving experience and to back you up at your every turn. || Quality that Matters: The car brake rotors front are precisely cut to provide a secure and proper fit, individually inspected, and made following strict quality control guidelines to help maintain safety and deliver consistent stopping power without any fading. || Engineered in Canada: Our front brake kits are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as go make every turns.
$78.19
27 Sep 2023
US: Super Brakes
[Front] Brake X Replacement Brake Rotors Kit | Aegis GEOMET Coated Front Rotors | Compatible with Chevrolet Spark 1.4 2016 2017 2018 2019
Brake X 2 Piece Brake Rotors Kit Replacement: Each brake rotor kit comes with 2 heavy duty brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || GEOMET Coated: Our automotive replacement brake rotors is made using heavy duty G3000 grade cast iron and GEOMET coated to offer just the right balance of rust and corrosion resistant performance, strength, quality and affordability. || Smoothened and Balanced: Our disc brakes are double disc smoothened and mill balanced to help prevent cracking and build up. The front brakes are engineered to elevate your driving experience and to back you up at your every turn. || Quality that Matters: The car brake rotors front are precisely cut to provide a secure and proper fit, individually inspected, and made following strict quality control guidelines to help maintain safety and deliver consistent stopping power without any fading. || Engineered in Canada: Our front brake kits are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as go make every turns.
Brake X 2 Piece Brake Rotors Kit Replacement: Each brake rotor kit comes with 2 heavy duty brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || GEOMET Coated: Our automotive replacement brake rotors is made using heavy duty G3000 grade cast iron and GEOMET coated to offer just the right balance of rust and corrosion resistant performance, strength, quality and affordability. || Smoothened and Balanced: Our disc brakes are double disc smoothened and mill balanced to help prevent cracking and build up. The front brakes are engineered to elevate your driving experience and to back you up at your every turn. || Quality that Matters: The car brake rotors front are precisely cut to provide a secure and proper fit, individually inspected, and made following strict quality control guidelines to help maintain safety and deliver consistent stopping power without any fading. || Engineered in Canada: Our front brake kits are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as go make every turns.
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 3658194:
Information:
Ramp
Illustration 14 1. Ramp2. Ramp Mounting Bracket3. Conveyor4. Ramp Mounting PinLine up the mounting holes in the end of the ramp with the holes in the ramp mounting bracket. Install the mounting pin. Retain the mounting pin with washers and keys, provided.Make sure that the conveyor is located in a straight line which lines up with the centerline of the track press. Pull a tight string along the edge of the conveyor to assist in aligning conveyor sections. Tighten all bolts between the conveyor and the legs, in the hydraulic support brackets, and the shoe lifter rail connections.The operating height for the conveyor is 864 mm (34 inches) from the floor to the top of the gravity rollers. The working height for the track press is 775 mm (30.5 inches) from the floor to the top of the base plate, the surface on which the saddles are mounted.The indexer table is mounted on the first conveyor leg; the height is determined by the height of the conveyor. The other end of the indexer table, next to the track press, is adjustable to position the extension bars on top of the saddle bolts. Different combinations of saddles, such as a Caterpillar Saddle or a Wolff saddle positioned on the conversion plate, require the front of the indexer table to be adjusted to different elevations. The indexer lift cylinder contains an adjustment mechanism which changes the collapsed height of the cylinder to determine the position of the fully lowered indexer table.Determine the highest point of the floor under the track press, indexer, and conveyor. Calculate the amount of shims needed to raise the track press to this highest point. Install the required amount of shims under the track press to level it from front to back within 0.8 mm (0.030 inch) over the length of the work area on the base plate. Level the press from side-to-side within 0.8 mm (0.030 inch) across the width of the base plate from inside-to-inside of the 150 mm (6 inch) side plates.Start at the indexer and level the conveyor using the same method. The conveyor must be level in both directions, from side-to-side and lengthwise. Install the required number of shims under the legs to level the conveyor within 0.8 mm (0.30 inch) from outside-to-outside of the conveyor and within 0.8 mm (0.30 inch) over 610 mm (24 inches) over the length of the conveyor. The shims under the conveyor legs should be the same shape and size as the plate at the bottom of the leg. This assures proper support of the leg and eliminates housekeeping problems.Drill the holes in the concrete through the holes in the track press floor plate and the holes in the bottom of the conveyor legs. Secure the press and conveyor in position with concrete anchors. An anchor like the Phillips Wedge Lock is recommended.
Illustration 15Operational Check Of The Track Press
Illustration 16 1. Hydraulic Tank2. Sight GaugeThe two hydraulic tanks have a combined capacity of 114 liters
Illustration 14 1. Ramp2. Ramp Mounting Bracket3. Conveyor4. Ramp Mounting PinLine up the mounting holes in the end of the ramp with the holes in the ramp mounting bracket. Install the mounting pin. Retain the mounting pin with washers and keys, provided.Make sure that the conveyor is located in a straight line which lines up with the centerline of the track press. Pull a tight string along the edge of the conveyor to assist in aligning conveyor sections. Tighten all bolts between the conveyor and the legs, in the hydraulic support brackets, and the shoe lifter rail connections.The operating height for the conveyor is 864 mm (34 inches) from the floor to the top of the gravity rollers. The working height for the track press is 775 mm (30.5 inches) from the floor to the top of the base plate, the surface on which the saddles are mounted.The indexer table is mounted on the first conveyor leg; the height is determined by the height of the conveyor. The other end of the indexer table, next to the track press, is adjustable to position the extension bars on top of the saddle bolts. Different combinations of saddles, such as a Caterpillar Saddle or a Wolff saddle positioned on the conversion plate, require the front of the indexer table to be adjusted to different elevations. The indexer lift cylinder contains an adjustment mechanism which changes the collapsed height of the cylinder to determine the position of the fully lowered indexer table.Determine the highest point of the floor under the track press, indexer, and conveyor. Calculate the amount of shims needed to raise the track press to this highest point. Install the required amount of shims under the track press to level it from front to back within 0.8 mm (0.030 inch) over the length of the work area on the base plate. Level the press from side-to-side within 0.8 mm (0.030 inch) across the width of the base plate from inside-to-inside of the 150 mm (6 inch) side plates.Start at the indexer and level the conveyor using the same method. The conveyor must be level in both directions, from side-to-side and lengthwise. Install the required number of shims under the legs to level the conveyor within 0.8 mm (0.30 inch) from outside-to-outside of the conveyor and within 0.8 mm (0.30 inch) over 610 mm (24 inches) over the length of the conveyor. The shims under the conveyor legs should be the same shape and size as the plate at the bottom of the leg. This assures proper support of the leg and eliminates housekeeping problems.Drill the holes in the concrete through the holes in the track press floor plate and the holes in the bottom of the conveyor legs. Secure the press and conveyor in position with concrete anchors. An anchor like the Phillips Wedge Lock is recommended.
Illustration 15Operational Check Of The Track Press
Illustration 16 1. Hydraulic Tank2. Sight GaugeThe two hydraulic tanks have a combined capacity of 114 liters
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3024, 3024C, 304.5, 902, AP-255E, BB-621C, C2.2, CB-334E, CB-34, CB34B, CB34B XW, CC34B
3383403
SHAFT
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013C, 3024C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013C, 3024C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3011C, 3013C, 3024C, AP-255E, BB-621C, C0.5, C0.7, C1.1, C1.5, C1.6, C2.2, CB-14, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, ...
3903731
SHAFT
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3011C, 3013C, 3024C, AP-255E, BB-621C, C0.5, C0.7, C1.1, C1.5, C1.6, C2.2, CB-14, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, ...
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3011C, 3013C, 3024C, AP-255E, BB-621C, C0.5, C0.7, C1.1, C1.5, C1.6, C2.2, CB-14, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, ...
2356984
SHAFT-ROCKER ARM
3013C, C1.1, C1.5, C2.2, CB-214E, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
3013C, C1.1, C1.5, C2.2, CB-214E, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
3096728
SHAFT
C0.7, C1.1, C1.5, C1.6, C2.2, CB24B
C0.7, C1.1, C1.5, C1.6, C2.2, CB24B
4242977
SHAFT
C1.5, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
C1.5, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
1281099
SHAFT
CB34B, CB34B XW, CC34B, CP-54B, CP-56, CP-573E, CP-64, CS-531D, CS-533C, CS-533D, CS-54B, CS-56, CS-563C, CS-563D, CS-563E, CS-573C, CS-573D, CS-583C, CS-583D, CS-583E, CS-64, CS-64B, CS-74
CB34B, CB34B XW, CC34B, CP-54B, CP-56, CP-573E, CP-64, CS-531D, CS-533C, CS-533D, CS-54B, CS-56, CS-563C, CS-563D, CS-563E, CS-573C, CS-573D, CS-583C, CS-583D, CS-583E, CS-64, CS-64B, CS-74
3673104
SHAFT
CB22B
CB22B
4431671
SHAFT
CB34B, CC34B
CB34B, CC34B
4431669
SHAFT
CB24B, CC24B
CB24B, CC24B
4431670
SHAFT
CB32B
CB32B
3465476
SHAFT
CB-44B, CB-54B
CB-44B, CB-54B
3465474
SHAFT
CB-44B, CB-54B
CB-44B, CB-54B
3465468
SHAFT GP-ECCENTRIC WEIGHT
CB-44B, CB-54B
CB-44B, CB-54B
5E8200
SHAFT
CB-44B, CB-54B
CB-44B, CB-54B
3435612
SHAFT AS-WEIGHT
CB-44B, CB-54B
CB-44B, CB-54B
3435611
SHAFT
CB-44B, CB-54B
CB-44B, CB-54B
3828795
SHAFT
AS3143
AS3143
3828796
SHAFT
AS3143
AS3143
3798196
SHAFT AS
AS3143
AS3143
3810707
SHAFT GP-DRIVE
AS3143
AS3143
4431671
SHAFT
CB34B, CC34B
CB34B, CC34B
3673104
SHAFT
CB22B
CB22B