SHAFT-DRIVE 3B1916 - Caterpillar

(1) Torque for the terminal nuts ... 30 3 N m (22 2 lb ft)(2) Torque for the screws that hold the nose housing to the lever housing ... 20 2 N m (15 1 lb ft)Clearance between the pinion and housing (pinion clearance) ... 8.3 to 9.9 mm (.33 to .39 in)8C3593 (9N0721) 24V
Rotation as seen from the drive end ... ClockwiseNo load conditions: Speed (rpm) ... 6650 1150Current (amps) ... 100 to 170AVoltage ... 11V7T0796 (3T2650) 24V
Rotation as seen from the drive end ... ClockwiseNo load conditions: Speed (rpm) ... 7250 1750Current (amps) ... 70AVoltage ... 23V 7T0795 (3T2650) 24V
Rotation as seen from drive end ... ClockwiseNo load conditions: Speed (rpm) ... 5500 minimumCurrent (amps) ... 140A maximumVoltage ... 24V(1) Intermediate housing.(2) Bracket.(3) Torque for small solenoid terminal nuts ... 2.25 0.25 N m (20 2 lb ft)(4) Torque for large terminal nuts ... 30 3 N m (22 2 lb ft)(5) Bolt. Tighten to a torque of ... 7 to 10 N m (5 to 7 lb ft)The pinion clearance is correct when the solenoid position (dimension X) is 62.50 + 0.20 - 0.50 mm (2.46 + .008 - .020 in) from intermediate housing (1). The following procedure is used to adjust the solenoid position: a. Loosen bolts (5) and move the solenoid until distance (X) is correct. Bracket (2) has elongated holes.b. Tighten bolts (5) after the adjustment is correct to a torque of ... 7 to 10 N m (5 to 7 lb ft)