SHAFT AS-CLUTCH 3P5737 - Caterpillar

Illustration 1 g01988553 (1) Before assembly, lubricate the threads of the pipe plug with 4C-5599 Anti-Seize Compound. Use the following procedure to tighten the bolts of the cylinder head that is shown in Illustration 1:Note: Before assembly, coat the threads of the bolt with clean engine oil.
Tighten the bolt 1 through bolt 8 in the numerical sequence to 30 5 N m (22 4 lb ft).
Tighten the bolt 1 through bolt 8 in the numerical sequence to 100 15 N m (74 11 lb ft).
Tighten the bolt 1 through bolt 8 in the numerical sequence to 450 15 N m (332 11 lb ft).
Loosen the bolt 1 through bolt 8 in the numerical sequence to an angle of 90 5 degrees.
Tighten the bolt 1 through bolt 8 in the numerical sequence to 410 15 N m (302 11 lb ft). Note: Tighten the bolts (2) only after the cylinder head bolts have been given final torque. (2) Torque for the bolts ... 55 10 N m (41 7 lb ft)
Illustration 2 g01413732 (A) Height of the new cylinder head ... 142.00 0.15 mm (5.591 0.006 inch)Note: Before assembly, apply 6V-6640 Sealant to the bore of the cup plugs. (B) Installation depth of the cup plugs from the surface of the cylinder head ... 9.0 0.5 mm (0.35 0.02 inch) (D) Installation depth of the cup plugs from the surface of the cylinder head ... 1.0 0.5 mm (0.04 0.02 inch)