SHAFT 3V0838 - Caterpillar

3V0838 SHAFT Caterpillar parts 955K, 955L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3V0838
3V-0838
3V0838

Weight: 50 pounds 22 kg.

Buy SHAFT 3V0838 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Compatible equipment models: 3V0838:

TRACK LOADER 955K 955L Caterpillar

Number on catalog scheme: 26

For full view, you need register

Information:

Illustration 1 g00693257
(1) Connecting rod (2) Piston pin bearing Clearance between the piston pin and the piston pin bearing ... 0.010 to 0.025 mm (0.00040 to 0.00099 inch)Service limit C1.5 and C2.2 ... 0.10 mm (0.004 inch) (3) Tighten the nut and bolt to the following torque. C1.5 and C2.2 ... 52 N m (38 lb ft) (4) Connecting rod bearing Clearance between the connecting rod bore and the connecting rod bearing ... 0.10 to 0.30 mm (0.004 to 0.012 inch) Service limit ... 0.70 mm (0.0276 inch)Markings on the Connecting Rod
Illustration 2 g00555416
Typical exampleThe pistons and connecting rods are matched to each cylinder. Note the position of each connecting rod and piston for correct assembly.Identification marks (1) on the connecting rod and on the connecting rod cap must be matched and aligned. When the connecting rod is installed correctly, the marks should face the right side of the engine.Refer to Systems Operation, Testing and Adjusting, "Connecting Rod - Inspect" for the procedure to measure distortion and parallelism of the connecting rod.