SHAFT GP-OUTPUT 4495050 - Caterpillar

4495050 SHAFT GP-OUTPUT Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4495050
449-5050
4495050

Buy SHAFT GP-OUTPUT 4495050 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 1 request: Show. This information for suppliers only!

#802717 4495050

2022-02-04

Number on catalog scheme: 5

Caterpillar 4495050 Parts scheme SHAFT GP-OUTPUT

For full view, you need register

Information:

Start By:
Remove the right fuel tank and remove the left fuel tank.
Illustration 1 g02332973
Remove hand rail assemblies (1). Repeat this step for the opposite side of the machine.
Illustration 2 g02342916
Attach Tooling (A) and a suitable lifting device to ladder assembly (2). The weight of ladder assembly (2) is approximately 113 kg (250 lb). Remove ladder assembly (2). Repeat this step for the opposite side.
Illustration 3 g02680417
Attach a suitable lifting device to step assembly (3). The weight of step assembly (3) is approximately 27 kg (60 lb). Remove step assembly (3). Repeat this step for the opposite side.
Illustration 4 g02343183
Left side battery box
Remove cable clamps (4) and (6). Disconnect cable assemblies (5) and position cable assemblies (5) out of the way inside of the machine.
Illustration 5 g02343198
Right side battery box
Remove cable clamps (8). Disconnect cable assemblies (7) and position cable assemblies (7) out of the way inside of the machine.
Illustration 6 g02343216
Remove covers (9).
Illustration 7 g02343257
Disconnect harness assemblies (10). Cut cable strap (11).
Illustration 8 g02343279
Disconnect tube assemblies (12).
Illustration 9 g02343839
Illustration 10 g02343878
Remove bolt (13). Repeat this step for the opposite side of the machine.
Attach Tooling (C) and a suitable lifting device to the front of bumper assembly (14). The weight of bumper assembly (14) is approximately 5783 kg (12750 lb).
Position Tooling (B) and a suitable lifting device to the rear of bumper assembly (14) through the hole at Location (X).
Remove bolts (15) and remove bumper assembly (14).
Illustration 11 g02344056
Remove hose assembly (16) and harness assembly (17) from center fuel tank (18).
Illustration 12 g02344101
Attach Tooling (A) and a suitable lifting device to center fuel tank (18). The weight of center fuel tank (18) is approximately 272 kg (600 lb). Remove the mounting bolts and remove center fuel tank (18). Installation Procedure
Install center fuel tank (18) in the reverse order of the removal procedure.