SHAFT GP-INPUT 4525092 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 2 Start By:
Remove the piston pump (right propel). Refer to Disassembly and Assembly, "Piston Pump (Right Propel) - Remove".
Illustration 1 g02431364
Remove the nut and clip (1).
Illustration 2 g02431377
Attach a suitable lifting device to engine (2). The weight of engine (2) is approximately 810 kg (1786 lb).
Attach a second suitable lifting device and Tooling (A) to pump drive (3). The weight of pump drive (3) is approximately 131 kg (289 lb).
Remove bolts (5) located on top of pump drive (3). The remaining bolts (5) will be removed in Step 9 and Step 13.
Move harness assembly (4) out of the way.
Illustration 3 g02431379
Remove cable strap (6) and move harness assembly (4) out of the way.
Remove bolts (7) and (9) in order to move the bundle of hose assemblies (8) out of the way.
Illustration 4 g02441277
Remove the six bolts (10). Move harness assembly (4) out of the way.
Loosen bolt (12) and rotate support bracket (11) in order to remove bolts (5).
Illustration 5 g02431380
Remove the six bolts (14) and move harness assembly (4) out of the way.
Remove the bolts and support bracket (16).
Remove bolt (15) and bracket (13).
Remove the remaining bolts (5) and pump drive (3).