SHAFT 4584125 - Caterpillar

4584125 SHAFT Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4584125
458-4125
4584125

Weight: 35 pounds 15 kg.

Buy SHAFT 4584125 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 1 request: Show. This information for suppliers only!

#682157 4584125

2021-07-09

Number on catalog scheme: 22

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine

423-4971: DRIVE GP-CIRCLE » M00666080616

14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine

423-4971: DRIVE GP-CIRCLE » M00667880515

14M Motor Grader R9J00001-UP (MACHINE) POWERED BY C11 Engine

423-4971: DRIVE GP-CIRCLE » SEBP61220818

Information:

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the O-ring seals. Replace the seals, if necessary.
Illustration 1 g00513712
Typical example
Install O-ring seal (9). Position engine oil cooler bonnet (10) in hose (8) .
Illustration 2 g00684073
Typical example
Illustration 3 g00684065
Typical example
Install the two O-ring seals on the oil filter base. Position the oil cooler (4) on the oil filter base.
Install two bolts (6) with washers and two bolts (3) with washers.
Install three bolts (5) with washers. Tighten hose clamp (7) .
Install the O-ring seals on elbow (1) of the engine oil cooler.
Lubricate the bore lightly with glycerin. Position the elbow of the engine oil cooler on engine oil cooler core (4) .
Install three bolts (2) and the washers.
Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual for the correct filling procedure.