SHAFT GP-DRIVE 4876242 - Caterpillar

Illustration 1 g03351028
Table 1
Specification for 377-2411 Engine Oil Lines Gp
Item Qty Part Specification Description
1 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
2 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85 to 100 N (19 to 22 lb).
Free length after test is 112.7 mm (4.44 inch).
The cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
The cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
3 5 237-7623 O-Ring Seal Before assembly, lubricate the bore lightly with fluid that is being sealed.