4E8557 SHAFT AS Caterpillar parts
824G II, 824K, 825K, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 988F, 988F II, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992D, 992G, 992K, 993K, 994, 994D, ...
Rating:
Alternative (cross code) number:
CA4E8557
4E-8557
4E8557
CA4E8557
4E-8557
4E8557
Weight: 0.25 pounds 0 kg.
LANDFILL COMPACTOR, WHEEL LOADER,
Compatible equipment models: 4E8557:
SOIL COMPACTOR
825K
Number on catalog scheme:
2
For full view, you need register
Cat SIS web machinery list:
Information:
Starting The Engine
The engine's ECM will automatically provide the correct amount of fuel in order to start the engine. Do not hold the throttle down while the engine is cranking. If the engine fails to start in 30 seconds, release the starting switch. Allow the starting motor to cool for two minutes before the starting motor is used again.
Excessive ether (starting fluid) can cause piston and ring damage. Use ether for cold weather starting purposes only.
Cold Mode Operation
The ECM will set the cold start strategy when the coolant temperature is below 18 °C (64 °F).When the cold start strategy is activated, low idle rpm will be increased to 1000 rpm and the engine's power will be limited.Cold mode operation will be deactivated when any of the following conditions have been met:
Coolant temperature reaches 18 °C (64 °F).
The engine has been running for fourteen minutes.Cold mode operation varies the fuel injection amount and the timing for white smoke cleanup. The engine operating temperature is usually reached before the walk-around inspection is completed. The engine will idle at the programmed low idle rpm in order to be put in gear. After the cold mode is completed, the engine should be operated at low rpm until normal operating temperature is reached. The engine will reach normal operating temperature faster when the engine is operated at low rpm and low power demand. Customer Specified Parameters
The engine is capable of being programmed for several customer specified parameters. For a brief explanation of each of the customer specified parameters, see the Operation and Maintenance Manual.
The engine's ECM will automatically provide the correct amount of fuel in order to start the engine. Do not hold the throttle down while the engine is cranking. If the engine fails to start in 30 seconds, release the starting switch. Allow the starting motor to cool for two minutes before the starting motor is used again.
Excessive ether (starting fluid) can cause piston and ring damage. Use ether for cold weather starting purposes only.
Cold Mode Operation
The ECM will set the cold start strategy when the coolant temperature is below 18 °C (64 °F).When the cold start strategy is activated, low idle rpm will be increased to 1000 rpm and the engine's power will be limited.Cold mode operation will be deactivated when any of the following conditions have been met:
Coolant temperature reaches 18 °C (64 °F).
The engine has been running for fourteen minutes.Cold mode operation varies the fuel injection amount and the timing for white smoke cleanup. The engine operating temperature is usually reached before the walk-around inspection is completed. The engine will idle at the programmed low idle rpm in order to be put in gear. After the cold mode is completed, the engine should be operated at low rpm until normal operating temperature is reached. The engine will reach normal operating temperature faster when the engine is operated at low rpm and low power demand. Customer Specified Parameters
The engine is capable of being programmed for several customer specified parameters. For a brief explanation of each of the customer specified parameters, see the Operation and Maintenance Manual.
Parts shaft Caterpillar catalog:
826C, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 972G, 980C, 980G, 980G II, 980H, 980K, 986H, 988B, 988F, 988F II, 988G, 988H, 988K, D44B, D550B
814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980M, R1600, R1600G,...
814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 980C, 980F, 980F II, R1600, R1600G, R1600H, R1700 II, R1700G
814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966F, 966F II, 966G, 966G II, 966H, 966K, 970F, 972G, 972G II, 972H, 972K, R1300, R1300G
824G, 824G II, 824H, 824K, 825H, 825K, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, AD30, AD45, AE40 II, R1700G
992C, 992D, 992G, 994, 994D, 994F
834B, 836, 986H, 988B, 988F, 988F II
980C, 980F, 980F II, R1700 II, R1700G
966D, 966F, 966F II, R1300, R1300G, R1300G II
826G, 826G II, 980G, 980G II, 980H, 980K, 980M, 982M, AD30, R1700G
834G, 834H, 836G, 836H, 988G, 988H
AD40, AD45, AE40, D10, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, R2900G, R3000H
1007417
SHAFT-BEVEL PINION
844, 844H, 990, 990 II, 992D
844, 844H, 990, 990 II, 992D
1516302
SHAFT-AXLE
990 II, 990H, 990K
990 II, 990H, 990K
4E9456
SHAFT-GOVERNOR CONTROL
824G, 825G, 826G, 844, 854G, 950G, 962G, 966G, 972G, 980G, 988F, 988F II, 990, 990 II, 992D, 992G, 994, 994D
824G, 825G, 826G, 844, 854G, 950G, 962G, 966G, 972G, 980G, 988F, 988F II, 990, 990 II, 992D, 992G, 994, 994D
4E6332
SHAFT-GOVERNOR CONTROL
824G, 825G, 826G, 844, 854G, 950G, 962G, 966G, 972G, 980G, 988F, 988F II, 990, 990 II, 992D, 992G, 994, 994D
824G, 825G, 826G, 844, 854G, 950G, 962G, 966G, 972G, 980G, 988F, 988F II, 990, 990 II, 992D, 992G, 994, 994D
1152014
SHAFT
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 836G, 836H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 836G, 836H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
824G, 825G, 825G II, 826G, 826G II, 980G, 980G II, 980H, AD40, AE40
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 988B, 988F, 988F II, 988G, 988H, 988K, D350E, D350E II, D400, D400E, D44B, D550B
6Y6441
SHAFT-TRANSFER
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 986H, 988F, 988F II, 988G, 988H, 988K, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, AE40 II, R2900, R2900G, R3000H
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 986H, 988F, 988F II, 988G, 988H, 988K, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, AE40 II, R2900, R2900G, R3000H
4E9268
SHAFT AS
990, 990 II, 990H, 994F
990, 990 II, 990H, 994F
1323915
SHAFT AS
844, 854G, 990 II, 992G
844, 854G, 990 II, 992G
844, 854G, 990, 990 II, 992G
4E5870
SHAFT-PLANETARY
844, 844H, 844K, 990, 990 II, 990H, 990K
844, 844H, 844K, 990, 990 II, 990H, 990K