4N2773 SHAFT AS-CONTROL Caterpillar parts
225, 231D, 3160, 3208, 613B, 613C, CB-614, CS-551, PR-1000, PS-500
Rating:
Alternative (cross code) number:
CA4N2773
4N-2773
4N2773
CA4N2773
4N-2773
4N2773
Weight: 0.60 pounds 0 kg.
COLD PLANER, WHEEL TRACTOR,
Compatible equipment models: 4N2773:
Number on catalog scheme:
16
For full view, you need register
Information:
Conditions Which Generate This Code:The Electronic Control Module (ECM) will log a diagnostic code if the ECM detects all of the following conditions:
The engine speed is greater than 0 rpm.
The pattern for the timing ring is incorrect for five seconds.The ECM will log a diagnostic code, and the ECM will have an active diagnostic code if the ECM detects all of the following conditions:
The engine speed is greater than 0 rpm.
The pattern for the timing ring is incorrect for five seconds.
The pattern for the timing ring is correct again for five seconds.System Response:The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on the Caterpillar Electronic Technician (ET).
Engine misfires
Engine shutdownNote: The engine will shut down only if the primary engine speed/timing sensor and the secondary engine speed/timing sensor are abnormal.Test Step 1. Perform the following test: Engine Speed/Timing Sensor Circuit - TestResults:
OK - Stop.
The engine speed is greater than 0 rpm.
The pattern for the timing ring is incorrect for five seconds.The ECM will log a diagnostic code, and the ECM will have an active diagnostic code if the ECM detects all of the following conditions:
The engine speed is greater than 0 rpm.
The pattern for the timing ring is incorrect for five seconds.
The pattern for the timing ring is correct again for five seconds.System Response:The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on the Caterpillar Electronic Technician (ET).
Engine misfires
Engine shutdownNote: The engine will shut down only if the primary engine speed/timing sensor and the secondary engine speed/timing sensor are abnormal.Test Step 1. Perform the following test: Engine Speed/Timing Sensor Circuit - TestResults:
OK - Stop.
Cat SIS web machinery list:
Parts shaft Caterpillar catalog:
215B, 225, 227, 229, 951B, 953, 953B, 953C, 955H, 955K, 955L, D5, D5B, D5E, FB221
517, 527, 561M, 561N, 613C, 613C II, 613G, 936, 936F, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966H, 966K, 966M, 966R, D4H XL, D4HTSK III, D5H,...
D4E SR, PR-1000
518, 518C, 528, 528B, 530B, 613, 613B, 920, 930, 941, 951B, D4D, FB518
528, 613C, 613C II, 613G, 950B, 950B/950E
613C, 613C II, 613G, 936, 936F, 950B, 950B/950E, 950F, 950F II, 960F, 966C, 966R, G936
518, 528, 613C, 613C II, 613G, 950B, 950B/950E, D300E, R1300, R1300G, R1300G II
613, 613B, 613C, 613C II, 613G
613, 613B, 613C, 613C II, 613G
613B, 613C, 613C II, 613G
613, 613B, 950
613, 613B, 950
225, 225D, 3208, 613C, PR-1000, PS-500
7E8670
SHAFT
3208
3208
3208
7E0303
SHAFT AS-TURBINE
3208, 3406B, 769C, 771C
3208, 3406B, 769C, 771C
225, 3208, 613B, 613C, 910, 931B, D3, FB221, PR-1000, PS-500
225, 231D, 3208, 613B, 613C, CS-551, PR-1000, PS-500
3208, 613C
1245942
SHAFT-SOLENOID
3208, 613C, CB-614, PR-1000
3208, 613C, CB-614, PR-1000
1245941
SHAFT-CONTROL
3208, 613C, CB-614, PR-1000
3208, 613C, CB-614, PR-1000
225, 231D, 3208, 613B, 613C, CB-614, CS-551, PR-1000, PS-500
120G, 12G, 130G, 140G, 1673C, 215, 225, 231D, 235, 3160, 3208, 3304, 3306, 518, 528, 613B, 613C, 627B, 637D, 639D, 920, 941, 950, 955L, 977K, 980B, CB-614, CS-551, D4D, D4E, D5, D5B, D6C, D6D, D7F, D7...