SHAFT 4N3844 - Caterpillar

Table 1
OP6-0 Setpoints (1) - Spare Input/Output Programming    
Setpoint    Name    Description    Range Of Value    Factory Default    
SP01     Spare Input 1
Active State     Input state used by the GSC+ to declare that a SP1 fault exists.     0 - active low
1 - active high     0    
SP02     Spare input 1
Response     GSC+ response to a SP1 fault.     0 - shutdown
1 - alarm     0    
SP03     Spare Input 1
Time Delay     Amount of time the GSC+ waits before responding to a SP1 fault.     0 to 250 seconds
in increments of 1     0 seconds    
SP04     Spare Input 2
Active State     Input state used by the GSC+ to declare that a SP2 fault exists.     0 - active low
1 - active high     0    
SP05     Spare Input 2
Response     GSC+ response to a SP2 fault     0 - shutdown
1 - alarm     0    
SP06     Spare Input 2
Time Delay     Amount of time the GSC+ waits before responding to a SP2 fault.     0 to 250 seconds
in increments of 1     0    
SP07     Spare Input 3
Active State     Input state used by the GSC+ to declare that a SP3 fault exists.     0 - active low
1 - active high     0    
SP08     Spare Input 3
Response     GSC+ response to a SP3 fault.     0 - shutdown
1 - alarm     0    
SP09     Spare Input 3
Time Delay     Amount of time the GSC+ waits before responding to a SP3 fault.     0 to 250 seconds
in increments of 1     0 seconds    
SP10     Spare Input 4
Active State     Input state used by the GSC+ to declare that a SP4 fault exist.     0 - active low
1 - active high     0    
SP11     Spare Input 4
Response     GSC+ response to a SP4 fault.     0 - shutdown
1 - alarm     0    
SP12     Spare Input 4
Time Delay     Amount of time the GSC+ waits before responding to a SP4 fault.     0 to 250 seconds
in increments of 1     0 seconds    
SP13     Spare Output
Response     GSC+ response to the spare output trigger condition.     0 - active low
1 - active high     0    
SP15     Spare Relay Output
Response     GSC+ response to the spare relay trigger condition.     0 - relay inactive when triggered
1 - relay active when triggered     1    
SP14     Spare Output
Trigger Condition     The condition used by the GSC+ to trigger the spare output trigger response.     0 - unused
1 - active SP1 fault (2)
2 - active SP2 fault (2)
3 - active SP3 fault (2)
4 - active SP4 fault (2)
5 - any combination of active SP1, SP2, SP3 or SP4 faults (2)
6 - any active shutdown fault (AL1 - AL14, SP1 - 4, or CID FMI)
7 - any active alarm or shutdown fault (AL1 - 15, SP1 - 4, or CID FMI)
8 - cooldown mode
9 - coolant loss fault