SHAFT 5044242 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
C     5P-3537     Seal Guide     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01037829
Clean housing (3) for crankshaft front seal (2) and inspect the housing for any damage.
Lubricate the lip of crankshaft front seal (2) with clean engine oil.
Position crankshaft front seal (2) in housing (3) for the crankshaft front seal.
Ensure that the lip of the crankshaft front seal that is spring loaded is facing toward the inside of the front housing and that it is square with the bore of the housing for the crankshaft front seal.
Use Tooling (C) to install new crankshaft front seal (2) .
Apply clean engine oil on the area of the crankshaft pulley that will be in contact with crankshaft front seal (2) .End By: Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".