SHAFT 5451963 - Caterpillar

Illustration 1 g02479356There are several specific safety messages on this work tool. The exact location of the safety messages and the description of the safety messages are reviewed in this section. Become familiarized with all safety messages.Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety message. Loose adhesive will allow the safety message to fall.Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a safety message on the replacement part. Any Cat dealer can provide new safety messages.Do Not Operate (1)
Illustration 2 g01370904This safety message is located in the upper left corner on both sides of the housing of the work tool.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Crushing Hazard (2)
Illustration 3 g01378775This safety message is located in the lower right corner on both sides of the housing of the work tool.
Crushing hazard! Stay clear! Read and understand the instructions and warnings in the Operation and Maintenance manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Flying Object Hazard (3)
Illustration 4 g01392519This safety message is located in the lower right corner on both sides of the housing of the work tool.
Flying objects or debris can cause serious injury or death.In order to prevent injury to your eyes, wear eye protection when you operate the work tool.Make sure the host machine is equipped with a flying object guard.