SHAFT AS-DRIVE 5461865 - Caterpillar

Illustration 1 g03394496
Typical example
Table 1
Specification for 360-8782 Transfer Gear Gp and 360-8784 Input Transfer Gear Gp
Item Qty Part Specification Description
1 2 357-1126 Shim Pack(1) As required, use the shim pack to adjust the cage and the position of the bearing:
The 353-0266 Shim Pack consists of 22 shims. Total thickness of shims is 2.3 mm (0.09 inch).
2 1 318-1179 Speed Sensor Gp Torque to 37 4 N m (27 3 lb ft).
3 1 360-8789 Adapter Torque to 75 10 N m (55 7 lb ft).
4 18 8T-0722 Locking Bolt Torque to 70 15 N m (52 11 lb ft).
5 1 9X-7743 Lip Type Seal Lubricate lightly with lubricant that is being sealed.
6 - - Before assembly, apply white Loctite Breakloose PST to the surface.
7 1 5K-9243 Flared Elbow One clockwise rotation past maximum assembly torque allowed orientation.
(1) For further information on adjusting end play for the tapered bearing, refer to Testing and Adjusting, "Adjustment Procedure for the Input Gear".