SHAFT 5D9972 - Caterpillar

On the "Diagnostics" page, press "Manual Snapshot". The "Manual Snapshot" button will highlight in yellow and the "Manual Snapshot" page will appear.
Before beginning the recording process, note the status of the Memory Location . The Memory Location can be found on the "Memory Location/Increment Bar" (4). The status of the Memory Location can be found on the "Memory Location Status" button (5).
If the "Memory Location Status" button (5) is solid red (6), the displayed memory location is ready to receive a recorded event.
To initiate recording, press the "Off/Ready" button (6). The "Memory Location Status" button (5) will turn green (7) and recording will begin.
To stop recording, press the green "Recording" button (7). The recorded event will be stored in the displayed memory location (4).
If the Memory Location (4) shows a "Full" symbol (8), recording cannot take place within the indicated memory location.
To find an alternate or available memory location, press the "-" arrow or the "+" arrow on either end of the Increment Bar (4) until the "Memory Location Status" button turns red (6).
To begin recording, press the "Ready" button (6). Press the "Ready" button (6) again to stop recording. The recorded event will be stored in the displayed Memory Location (4).
Press the "Back" button (2) to return to the previous button.No Active or Logged Diagnostics Present
Illustration 14 g06257130
Events List Page
(2) Back Button
(9) Home buttonIf no active or logged diagnostics are present, a page will appear indicating that no active or logged diagnostic is present.
Illustration 15 g06257429
Events List Page
(10) Double Down Arrow button
(11) Double Up Arrow button
(12) Up Arrow button
(13) OK button
(14) Down Arrow buttonIf a diagnostic is present, the Events List page will show it. If the event is active, an “X” will appear in the Active column.Pressing the UP Arrow button (12) or the DOWN Arrow button (14) will allow the operator to scroll to the intended diagnostic. The chose diagnostic will be marked with a yellow horizontal bar. Pressing the OK button (14) will allow the operator to view the Events Details page.Note: : Pressing the DOUBLE DOWN Arrow button (10) will allow the operator to move directly to the bottom of the list. Pressing the DOUBLE UP Arrow button (11) will allow the operator to move directly to the top of the list
Illustration 16 g06257461
Events Details Information Page
(2) Back Button
(9) Home buttonPress the BACK button (2) to return to the previous page. Press the HOME button (9) to return to the HOME page (Performance Page). Warning messages can appear in the Lower Information Banner of the page. For more information on fault code warning messages, refer to the following section in this manual:
Warning Pop-Up Messages and Fault CodesEvent Snapshot
Service > Diagnostics > Event SnapshotThe Event Snapshot feature allows the operator to capture the machine operating conditions when a particular machine event occurs. The operator can select the event as a snapshot trigger. The operator may also clear the configurable trigger.
Illustration 17 g06257917
(3) UP Arrow button
(5) DOWN Arrow button
(8) Non-Interactive Scroll Bar with Menu Sliding Indicator
(27) Event Snapshot menu