SHAFT 5L5952 - Caterpillar

5L5952 SHAFT Caterpillar parts D379A, G398

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5L5952
5L-5952
5L5952

Weight: 0.32 pounds 0 kg.

Buy SHAFT 5L5952 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE, MARINE ENGINE,

Compatible equipment models: 5L5952:

GAS ENGINE G398

MARINE ENGINE D379A Caterpillar

Number on catalog scheme: None

For full view, you need register

Information:

Remove two bolts and washers (17) from the water pump.
Illustration 10 g00513017
Illustration 11 g00513033
Remove water pump (18) from the engine.Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 12 g00513033
Illustration 13 g00513017
Install water pump (18) to the engine.
Illustration 14 g00513009
Install two washers and bolts (17) to the water pump.
Illustration 15 g00512996
Install three nuts (16) to the water pump.
Illustration 16 g00512982
Install hose to the water pump and tighten clamp (15) .
Install two bolts and washers (14), as shown.
Illustration 17 g00512935
Install fan spider (13) to the engine.
Install four washers and bolts (12) to fan spider (13). Tighten bolts to a torque of 28 7 N m (20.7 5.2 lb ft).
Illustration 18 g00512898
Install the shroud to the radiator with eight washers and bolts (11).
Illustration 19 g00512888
Install support (10) with two washers and bolts (9) to the shroud.
Illustration 20 g00512846
Install V-belt (7) to refrigerant compressor (8) .Note: Check the V-belt tension. Use a Kent Moore Company BT-33-97 gauge.
Tighten two washers and bolts (6) to the bracket.
Illustration 21 g00512843
Install hose (5) to the water pump and tighten clamp (4) .
Illustration 22 g00512768
Install two fan guards (2) to shroud (3) .
Install fan guards (2) with six washers and bolts (1) to shroud (3) .
Refill the cooling system. Refer to Operation and Maintenance Manual, SEBU6868 for the proper procedure. The capacity of the cooling system is 10 L (2.7 US gal).
Close the engine hood.