5M1247 SHAFT Caterpillar parts
583K, D8H, D8K
Rating:
Alternative (cross code) number:
CA5M1247
5M-1247
5M1247
CA5M1247
5M-1247
5M1247
Weight: 39 pounds 17 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$168.04
07 Feb 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Shaft- Track RO 5M1247 New
$177.95
07 Oct 2017
42.39[18.90] pounds
CTP: CTP
Caterpillar SHAFT- TRACK ROLLER (5M1247) New Aftermarket By CTP
5M1247 Caterpillar Weight(lbs): 42.30 Length(cm): 10.2000 Width(cm): 10.2000 Depth(cm): 61.0000
5M1247 Caterpillar Weight(lbs): 42.30 Length(cm): 10.2000 Width(cm): 10.2000 Depth(cm): 61.0000
07 Oct 2017
CTP: CTP
5M1247 Shaft- Track Roller Fits Caterpillar
5M1247 Shaft- Track Roller
5M1247 Shaft- Track Roller
Number on catalog scheme:
9
For full view, you need register
Information:
Removal Procedure
Note: Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Shut off the air supply at the air reservoir. Drain the pressure air from the air starting system. Sudden release of pressure air can cause personal injury.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Turn the disconnect switch OFF when draining and/or removing any fuel system components.
Turn OFF the air supply at the air reservoir. Ensure that the air pressure is drained from the starting air system.
If necessary, turn OFF the gas supply if gas is being used. Ensure that the gas is drained from the starting air system.
Illustration 1 g06219442
Illustration 2 g06219449
Disconnect hoses (1), (2) and (3).
Remove two bolts (4).
Disconnect and remove lines group (5).
Illustration 3 g06219489
Attach a suitable lifting device to the air starting motor (7). The air starting motor weighs approximately 40 kg (88 lb).
Remove three bolts (6) and remove the air starting motor (7).
Note: Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Shut off the air supply at the air reservoir. Drain the pressure air from the air starting system. Sudden release of pressure air can cause personal injury.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Turn the disconnect switch OFF when draining and/or removing any fuel system components.
Turn OFF the air supply at the air reservoir. Ensure that the air pressure is drained from the starting air system.
If necessary, turn OFF the gas supply if gas is being used. Ensure that the gas is drained from the starting air system.
Illustration 1 g06219442
Illustration 2 g06219449
Disconnect hoses (1), (2) and (3).
Remove two bolts (4).
Disconnect and remove lines group (5).
Illustration 3 g06219489
Attach a suitable lifting device to the air starting motor (7). The air starting motor weighs approximately 40 kg (88 lb).
Remove three bolts (6) and remove the air starting motor (7).
Cat SIS web machinery list:
Parts shaft Caterpillar catalog:
594H, D8K, D9G, D9H
D8H, D8K
D8K
D8K
583K, D8K
594H, D8K
D7G, D8H, D8K, D9G
D8H
D8H, D8K
D8H
594H, D8K, D9G, D9H
572G, D7G, D7G2
572G, D7G, D7G2
621, 641B, 651E, 657E, 657G, 966C, 966R, 983, 983B, 992
D4E, D8K
8P0537
SHAFT
55
55
6P8038
SHAFT ASSEM.
955L, 977K, 977L
955L, 977K, 977L
3P4360
SHAFT
528, 54
528, 54
8S5004
SHAFT
D9G, D9H
D9G, D9H
3G3496
SHAFT
931, 931B, D3, D3B
931, 931B, D3, D3B
173B, 183B, 930R, D250B, D300B